hi,
a video of SuperCrawl ( a awesome week end ), saturday course 2
Supercrawl 2012 2.2 Pro Yzik on Vimeo
enjoy
a video of SuperCrawl ( a awesome week end ), saturday course 2
Supercrawl 2012 2.2 Pro Yzik on Vimeo
enjoy
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Yzik's XR NCD MOA PRO Comp
- Thread starter yzik
- Start date
Kratos
RCC Addict
Nice driving and looks like its working good for ya"thumbsup"
some news about my rig:
I removed the bad dig novak (there was problem when I switch position) and I buy a futaba 4pl is a marvel of radio "thumbsup"
i smashed my two microsidewinder together, decase the receiver, install these 3 parts on the rowdy racing electronic motor mount and cut the capacitor to install the cc bec under the servo
i will switch my scx10 shock body by the felsenfest one, i order some new cvd by SDS customz and krawler konceptz made me some awesome skins
i'm a fat comfortable guy who love fat rig :lmao: so i'm not running after lightweight, my truck weighs about 2.200 kg
I removed the bad dig novak (there was problem when I switch position) and I buy a futaba 4pl is a marvel of radio "thumbsup"
i smashed my two microsidewinder together, decase the receiver, install these 3 parts on the rowdy racing electronic motor mount and cut the capacitor to install the cc bec under the servo
i will switch my scx10 shock body by the felsenfest one, i order some new cvd by SDS customz and krawler konceptz made me some awesome skins
i'm a fat comfortable guy who love fat rig :lmao: so i'm not running after lightweight, my truck weighs about 2.200 kg
make a video of the sunday drive :
penchot crawler - YouTube
i love my settings , the rig work great "thumbsup""thumbsup"
penchot crawler - YouTube
i love my settings , the rig work great "thumbsup""thumbsup"
after Supercrawl and meeting Tomy from NCD, i'll try a new chassis from him:
the NCD MOA PRO Comp
it looks to work good, i have to go on the rocks now for more test. Otherwise i put off the SDS 300HD after many trouble with it and the difficulty to find replacement kit so i go back to the stock one ( stock work very good "thumbsup")
the NCD MOA PRO Comp
it looks to work good, i have to go on the rocks now for more test. Otherwise i put off the SDS 300HD after many trouble with it and the difficulty to find replacement kit so i go back to the stock one ( stock work very good "thumbsup")
ZZR 1100 Racer
Stephan Hauser / # 7
Look's good my friend"thumbsup"...see you in some weeks on the rocks
for sure man !!! i'm impatient to see you and your reptile again
p.s: i prepare some cocktail "thumbsup"
CrawlrKing
Rock Crawler
You could get Egressor's shocks bodies ? He no longer makes them... My SCX are leaking and would love to stop them doing that...
sorry , i try to order more of them but as you know he stop business for now, we have to be patient maybe he remake it again after holidays.otherwise if you come at the BIG, you can ask him directly
for the scx10 leaking you can use teflon tap on the cap and gearscience grease between the 2 o'ring in the shock
for the scx10 leaking you can use teflon tap on the cap and gearscience grease between the 2 o'ring in the shock
winnerone23
I wanna be Dave
Just a little thought of what I do to my scx shocks. HUGE help in the leaky area..
I take the plastic disc out from between the 2 o-rings and add a 3rd o-ring. Then reassemble with AE green slime. I'm sure gear science does the same thing tho.
With the 3rd o-ring in there, when you put it back together and tighten it down it compresses the o-rings tighter for a more snug fit. :thumbup:
I take the plastic disc out from between the 2 o-rings and add a 3rd o-ring. Then reassemble with AE green slime. I'm sure gear science does the same thing tho.
With the 3rd o-ring in there, when you put it back together and tighten it down it compresses the o-rings tighter for a more snug fit. :thumbup:
Salut Cedrick,
Thomas de Québec (mais né en France).
Sweet rig you got there!
I'll be following your thread
I am a bit of a Chaotic lover, and recently upgraded to the Smash.
I have a long thread (in french) of my build, many how-to and else that maybe could interest you
Build Chaotic Switch "ESPER" (Xr10)
Keep up the good work!
Thomas de Québec (mais né en France).
Sweet rig you got there!
I'll be following your thread
I am a bit of a Chaotic lover, and recently upgraded to the Smash.
I have a long thread (in french) of my build, many how-to and else that maybe could interest you
Build Chaotic Switch "ESPER" (Xr10)
Keep up the good work!
skipeee
Rock Stacker
Nice looking rig. The guys have already proved its a winner. Have fun at The Big and don't do anything I wouldn't do. "thumbsup"
EGRESSor
RCC Addict
Salut Cedrick,
Thomas de Québec (mais né en France).
Sweet rig you got there!
I'll be following your thread
I am a bit of a Chaotic lover, and recently upgraded to the Smash.
I have a long thread (in french) of my build, many how-to and else that maybe could interest you
Build Chaotic Switch "ESPER" (Xr10)
Keep up the good work!
hi thomas,
thanks for following, and i'm going to see your thread thanks for the advice "thumbsup"
you can trust us " a lot to do "
p.s: sally kiss from me
it's been fun for you to come to the big this years christian
otherwise,
i'm going to try to make some teflon parts for the SDS 300HD, i hope it will be work
Last edited:
after six months doing nothing, I took out the rig, I realized that the frontcasemod asked me problems on sidehill.
then return with a standard rear axles and it is much better especially with the voodoo that enhances the center of gravity and I added shims to the inside of the front shocks, I gain a much better stability. at the end of April I participated in a competition PACA where I finished in the sixth position and I am very happy the rig was super well.
to prepare the supercrawl I try superiors of carbon 3mm links ( i earn a little more than 40 gr )and calderwood design piece to enhance the anchor of my back links
i changes my old microsidewinder for some smashed br mini, they are a little less smooth than the castle one but work great.
put some ultra narrowed voodoo with special narrowed DD inner
I had great difficulty to settle my width. I finally find the right adjustment with 3 parts rims and spacers of different sizes:
and with a very ingenious system developed by pat13 no need to glue the tire to rims; it is very convenient
the narrowed voodoos works very well and i hope the driver too for the SC "thumbsup"
then return with a standard rear axles and it is much better especially with the voodoo that enhances the center of gravity and I added shims to the inside of the front shocks, I gain a much better stability. at the end of April I participated in a competition PACA where I finished in the sixth position and I am very happy the rig was super well.
to prepare the supercrawl I try superiors of carbon 3mm links ( i earn a little more than 40 gr )and calderwood design piece to enhance the anchor of my back links
i changes my old microsidewinder for some smashed br mini, they are a little less smooth than the castle one but work great.
put some ultra narrowed voodoo with special narrowed DD inner
I had great difficulty to settle my width. I finally find the right adjustment with 3 parts rims and spacers of different sizes:
and with a very ingenious system developed by pat13 no need to glue the tire to rims; it is very convenient
the narrowed voodoos works very well and i hope the driver too for the SC "thumbsup"
