TRX4 HoneyBee Comp Crawler #1 (Part #2) Body Mod 4 Cab Body

[Honeyman108]

So I almost have this TRX4 crawler running at a really really really capable and super functional! Was out today on the rocks here in Nashville got a couple videos and some nice photos I’m gonna post soon but I’m putting the final touches on the car and running it with the reefs 500 servo and a hobby wing quick run 1080 ESC soon going to change that up to a reefs 777 and Holmes hobbies BR-XL In this part #2 I’m showing a Body modification for a crawler pro line half cab body I use a hot racing front TRX four bumper that has a skid plate I take out the pegs to go into the front bumper mount and I turn the skid around and I found a way to get it real nice and flush on the back of the cab so the skid sits on a Hot Racing low battery tray that also holds some of the cables from the ESC and in the back it rests really nicely on the chassis I also have a bungee that holds it up over the top with the two posts in the front but it wouldn’t even need the bungee really it holds up so well the body fits perfect send me your comments thoughts I’m working on another body where I’m going to do the full bumper that you see in these pictures...
thanks everybody....
aloha keep buzzing......
Buzz buzz.....

 

[Honeyman108]

Here is the modification on the body... Buzzzz....

 

[ScaleLifeNewbie]

Here is the modification on the body... Buzzzz....

I like it![emoji1690]


Sent from my iPad using Tapatalk