SCX10II 4 link high clearance kit

[rccrawling1985]

Hello everyone. Thanks for having me. I joined the RC hobby last January and im 36 years old lol. Waited too long this hobby is awesome. Anyways, I have done a few enduro kits, scx10ii kits, gmade kits, trx4 sport kits and they have all been fun and i learned a lot. Im now building an scx10ii from scratch/ I picked up some axles and using a SOA and 4 link setup. My problem is, I have no idea what size links, or if there is a link kit, needed to make 12.3 wheelbase for 4 link. Any ideas?

 

[twade984]

I used this set on a stock scx10.2 chassis with ar44’s.

But, one important note, this set is for an og scx10 so it is in fact a 4 link/soa setup. I used it for a 3 link and had to use a different panhard and drag link.

And also note, the included rod ends are too long for proper 10.2 geometry. I used incision rod ends and it fit perfect. You could also use Traxxas revo rod ends.

You may find slight length adjustment necessary, most people use Traxxas jato rod ends and trim to length desired.

One more thing, incision and Traxxas pivot balls are slightly narrower than axial style. But the link kit does include axial pivot balls that can be used in either incision, or Traxxas rod ends.


10pcs/Set Stainless Steel Steering Link Rod Linkage Set for Axial SCX10 Crawler https://www.amazon.com/dp/B08KRVPFG...abc_RWJ2QQ7XF369WWEGG7G6?_encoding=UTF8&psc=1

https://www.amainhobbies.com/incision-rod-ends-w-pivot-balls-12-incirc00010/p-qezltatqgczxactz

Revo rod ends
https://www.amainhobbies.com/traxxas-large-rod-ends-w-hollow-balls-12-tra5347/p-qtqvqaqqxzxxactz?r=0

Jato rod ends
https://www.amainhobbies.com/traxxas-rod-ends-w-hollow-balls-12-tra5525/p-qqqltayqgzxxactz

Sent from my iPhone using Tapatalk

 

[rccrawling1985]

Thanks! I had this same exact set on order already and supposed to get it tomorrow lol. I figured this set was more of a 3 link panhard kit. I have some Traxxas 5347 rod ends. I did find an OG Scx10 high clearance links by Samix on Ebay. An OG SCX10 kit is really what I need since im going 4 link with a SOA. Ill see if I can make these links work before i explore other options. Appreciate the reply!

 

[MOguy]

Hello everyone. Thanks for having me. I joined the RC hobby last January and im 36 years old lol. Waited too long this hobby is awesome. Anyways, I have done a few enduro kits, scx10ii kits, gmade kits, trx4 sport kits and they have all been fun and i learned a lot. Im now building an scx10ii from scratch/ I picked up some axles and using a SOA and 4 link setup. My problem is, I have no idea what size links, or if there is a link kit, needed to make 12.3 wheelbase for 4 link. Any ideas?

I have used the element High Clearance links for the Enduro.