-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message. -
RPPHOBBY.COM- Post public questions,suggestions, or feedback here
Yep and I will always support my favorite vendor.
order placed
thank again corey the best RC vendor ever."thumbsup"
Thank you very much!
FRENCHBLUE72
RCC Addict
Looking for losi ten scte screw kit and losi diff oil?
heinie_21
RCC Addict
Hey Corey. Is there anything we can do if my order went from Oakland to Maine :shock: without stopping here in Utah for delivery?? Lol!! I'm losing all faith in USPS. I might have to take my business to UPS.
Sent from my SCH-I535 using Tapatalk 2
Sent from my SCH-I535 using Tapatalk 2
throttlejock27
Rock Crawler
Any idea when this servo will be back in stock?
http://www.rpphobby.com/product_p/hrc37950s.htm
http://www.rpphobby.com/product_p/hrc37950s.htm
Wow They have been pretty good for us. This one they are way off. Let me know what happens and if we need to look at a claim "thumbsup"
XJrob
Quarry Creeper
Don't know if I get ahold of you guys or strc but I'm having problems with a pair of strc knuckles I ordered from rpp last week.
The inner and outer bearings on the left knuckle fit like a charm and all is well. On the right side knuckle the outer bearing fits fine but it looks like the hole for the inner bearing was not machined right. When u put the bearing in by hand the bearing only goes half way in. I tapped it in and the hole deforms the bearing and makes it to were the bearing won't spin. You can see in the pic on the left side of the bearing there is a gap. What do I need to do about this?
The inner and outer bearings on the left knuckle fit like a charm and all is well. On the right side knuckle the outer bearing fits fine but it looks like the hole for the inner bearing was not machined right. When u put the bearing in by hand the bearing only goes half way in. I tapped it in and the hole deforms the bearing and makes it to were the bearing won't spin. You can see in the pic on the left side of the bearing there is a gap. What do I need to do about this?
Don't know if I get ahold of you guys or strc but I'm having problems with a pair of strc knuckles I ordered from rpp last week.
The inner and outer bearings on the left knuckle fit like a charm and all is well. On the right side knuckle the outer bearing fits fine but it looks like the hole for the inner bearing was not machined right. When u put the bearing in by hand the bearing only goes half way in. I tapped it in and the hole deforms the bearing and makes it to were the bearing won't spin. You can see in the pic on the left side of the bearing there is a gap. What do I need to do about this?
Contact STRC in the below link. If you have any problems with STRC support, Let me know and I will work with you. Thanks Corey
Contact Us
XJrob
Quarry Creeper
Thanks corey
summitcrawler
My vendor status has been revoked
wow! i placed an order at 1:35pm of 18 items and it was shipped at 2:06pm.... are you serious? it takes longer then that for me to box 1 thing!!!! lol
your service is unbelievable.
thank you for being so consistant too.
-Tyler
your service is unbelievable.
thank you for being so consistant too.
-Tyler
heinie_21
RCC Addict
it looks like they are gonna find their way to my house tomorrow. They've found their way to Utah at least, so that's good, right?:lmao:
Jeepfixer1
Rock Crawler
Corey, again thanks for the wonderful place to get our fix! Just ordered over 200$ worth of stuff. Got free shipping, 15$ off and saved 10$ on my rc4wd hilux toolbox vs their store and 5-10 on a bgr wraith bumper plus I'm sure some on the other stuff I ordered too. Filled out the bizrate survey for you and entered for a chance to win 25$. Whew money coming from everywhere ;p Too any of you looking for the best place to buy new RC swag, well you'd be less than smart to go elsewhere
Thank you"thumbsup"
killswitch
RCC Addict
Hey, I've paid with paypal numerous times from you guys, but was thinking... do you all take less of a hit percentage wise if a customer uses paypal or a credit/debit card? I've been in the retail business before and I know how much the credit card processors take. I'm getting ready to finish an order and I'd rather get you an extra percent of profit if I can.
Thank you, what ever works best for you. Visa or MC are best rates. AM is the worste...LOL
killswitch
RCC Addict
Gotcha. AMEX was the worst for us too lol. Every little bit counts, and your service is beyond great, so it's worth asking about.
shwng1973
RCC Addict
Thank you again. Worst part is I have to make another order....LOL
Similar threads
