ROLANDROCKSHOP
I wanna be Dave
a last minute build for the Superlift showdown G6
axial scx honcho roller chassis...*thanks szczerba!*
axial tranny/drive shafts
axial axles with axial c's and rear lockouts with vp histeer knuckles
cvds and a HR steel locker
hand bros cms steering
3 linked front and 4 linked rear
losi crawler shocks
custom front bumper
3racing winch with "Rockline" spooled on.
leds all around for whatever adventure awaits
rc4wd tsl boggers 1.9
mayhem 1.9 buckshots
Dinky Rc honcho interior with some axial interior acc.
Dinky Rc honcho bedside kit
honcho body/cage
electric..
30t Hpi race motor
hitec mg servo
sidewinder esc
2650mah 3s lipo nanotech x3
2s lipo 1300mah for powering the leds
i adde some hot glue to help hold the interior kit together better. and i added some velcro tabs to each side for easy removal for cleaning/detailing etc..
*Dinky rc has informed me the dash panel stickers are being printed,and should be ready by next week.*
Dinky rc bedsides kit installed
i added a screw on each lower corner to help hold the end pieces together better,as well as one on each side thru the cab.
here's the beef..
more to come!
"thumbsup"
axial scx honcho roller chassis...*thanks szczerba!*
axial tranny/drive shafts
axial axles with axial c's and rear lockouts with vp histeer knuckles
cvds and a HR steel locker
hand bros cms steering
3 linked front and 4 linked rear
losi crawler shocks
custom front bumper
3racing winch with "Rockline" spooled on.
leds all around for whatever adventure awaits
rc4wd tsl boggers 1.9
mayhem 1.9 buckshots
Dinky Rc honcho interior with some axial interior acc.
Dinky Rc honcho bedside kit
honcho body/cage
electric..
30t Hpi race motor
hitec mg servo
sidewinder esc
2650mah 3s lipo nanotech x3
2s lipo 1300mah for powering the leds
i adde some hot glue to help hold the interior kit together better. and i added some velcro tabs to each side for easy removal for cleaning/detailing etc..
*Dinky rc has informed me the dash panel stickers are being printed,and should be ready by next week.*
Dinky rc bedsides kit installed
i added a screw on each lower corner to help hold the end pieces together better,as well as one on each side thru the cab.
here's the beef..
more to come!
"thumbsup"