project "lets try to show up an 8 year old with a stock trx4"

[ben h]

yea its an odd name but my kid puts his almost stock trx4 more places then i go :ror::ror:
cut/choped brazin scale atl pro v2 chassis ( was way to long for this jeep body)
vanquish capra axles ( i need better portals but dont want brass any recomendations? i went with gpm but there sloppy)
mamba mini crawler esc
holms stubby 2200kv
tgh 2.low 60 sput 9 tooth pinion
brazin links
proline shocks
holmes shv650 servo
currently sitting on 2.2 irok's will be on the 2.2 klr but waiting on some h-tech rims to show up from south Korea


after redoing the sliders 16 times and the servo mount 22 times and the rear body mount 10 times i now have the body placement final! just gotta get the rear body mount to print nice
got the servo showed up high enough the axle bottoms out on the chassis and not the servo horn hoping that leavs enough room for a panhard bar. will be working on designing mounts for that next since i cant find one for the vanquish axle

waiting on some Polycarbonate carbon fiber filament PP+CF to show up looks like the lightest and strongest filament ( trying to cut weight on this truck even tho the tires make it super heavy)

then gotta design some bumpers. had some .1875 dom show up!

i dont think i skiped anything but heres the build so far!


<a href="https://ibb.co/fM7dyXk"><img src="https://i.ibb.co/VV8YzLg/20220216-204443.jpg" alt="20220216-204443" border="0" /></a>

<a href="https://ibb.co/pZWT4Fy"><img src="https://i.ibb.co/DkGFw2p/20220216-204459.jpg" alt="20220216-204459" border="0" /></a>

<a href="https://ibb.co/12pT3nS"><img src="https://i.ibb.co/vzrkbBt/20220216-204453.jpg" alt="20220216-204453" border="0" /></a>

<a href="https://ibb.co/LCrqySh"><img src="https://i.ibb.co/D7Y6F4g/20220216-201857.jpg" alt="20220216-201857" border="0" /></a>

<a href="https://ibb.co/9VNq4D7"><img src="https://i.ibb.co/s62F1fZ/20220216-201830.jpg" alt="20220216-201830" border="0" /></a>

<a href="https://ibb.co/B652Vp5"><img src="https://i.ibb.co/4SnRZqn/20220216-201152.jpg" alt="20220216-201152" border="0" /></a>

<a href="https://ibb.co/PYQNpPt"><img src="https://i.ibb.co/RSy9ns7/20220214-205032.jpg" alt="20220214-205032" border="0" /></a>

<a href="https://ibb.co/vvwXNsS"><img src="https://i.ibb.co/JFB3Yx9/20220215-074215.jpg" alt="20220215-074215" border="0" /></a>

<a href="https://ibb.co/D9v9GDZ"><img src="https://i.ibb.co/N9J916M/20220213-142216.jpg" alt="20220213-142216" border="0" /></a>

<a href="https://ibb.co/PGVvrCH"><img src="https://i.ibb.co/N2GdFYB/20220213-125643.jpg" alt="20220213-125643" border="0" /></a>




<a href="https://ibb.co/PgJTyWP"><img src="https://i.ibb.co/QMh8VHT/20220212-122202.jpg" alt="20220212-122202" border="0" /></a>

<a href="https://ibb.co/D1DLGSG"><img src="https://i.ibb.co/tHM3ZWZ/20220207-182019.jpg" alt="20220207-182019" border="0" /></a>

<a href="https://ibb.co/1T6QXdq"><img src="https://i.ibb.co/tDXK2xs/20220215-184252.jpg" alt="20220215-184252" border="0" /></a>

<a href="https://ibb.co/s1bP3S4"><img src="https://i.ibb.co/dpjcK9v/20220214-191434.jpg" alt="20220214-191434" border="0" /></a>

<a href="https://ibb.co/WyJP01b"><img src="https://i.ibb.co/Z8DYSCn/20220214-191354.jpg" alt="20220214-191354" border="0" /></a>

 

[ben h]

coupple updates designed and printed out panhard mount for the chassis and for the capra axle. ill probly end up redoing the body side and having it out of metal so i can extend it to make a bumper but much easier for trial and error on the printer!


<a href="https://ibb.co/ZzrMgF0"><img src="https://i.ibb.co/N2qyNJM/panhard1.jpg" alt="panhard1" border="0" /></a>

<a href="https://ibb.co/vLWwz2Y"><img src="https://i.ibb.co/0YLDJPt/panhard2.jpg" alt="panhard2" border="0" /></a>

<a href="https://ibb.co/7zh3htN"><img src="https://i.ibb.co/sP7T79J/panhard3.jpg" alt="panhard3" border="0" /></a>

<a href="https://ibb.co/wZqp7mX"><img src="https://i.ibb.co/SDgVcC8/panhard5.jpg" alt="panhard5" border="0" /></a>

full garbage can from trial and errors lol but now that everything is good its time to print them in polypropylene carbon fiber! super light and strong to shave a little weight off

<a href="https://ibb.co/hCr2ykj"><img src="https://i.ibb.co/wY8pRTX/panhard4.jpg" alt="panhard4" border="0" /></a>

 

[bgredjeep]

Looking good, though I'm a little biased towards a YJ.

I'm curious, why the chassis mounted servo instead of just putting it on the axle? Doesn't look like you are trying to fit into a comp class.

 

[ben h]

Looking good, though I'm a little biased towards a YJ.

I'm curious, why the chassis mounted servo instead of just putting it on the axle? Doesn't look like you are trying to fit into a comp class.

well id like it to fit class 3 but i dont really do any class stuff i just like to have fun. wasnt sure servo on axle would work not enough room above it with a servo winch

is there somthing that i missed that makes it not fit class 3?

 

[bgredjeep]

I was thinking the usd tires you had a picture of were larger than allowed. Maybe not. Other than the recent build series Josh and Matt are doing I don't really follow the comp class stuff.

Either way it looks cool. Interested to see it finished out.

 

[ben h]

I was thinking the usd tires you had a picture of were larger than allowed. Maybe not. Other than the recent build series Josh and Matt are doing I don't really follow the comp class stuff.

Either way it looks cool. Interested to see it finished out.

ahh they measure right at the 5.75in allowed

yea i havent ever been much of a comp guy i just want something that can be since theres plenty of it around me in the summer.

im excited to keep going my wheels should be here Tuesday so i can mount up the usd stickies. then im gunna do a little bit of interior and some sort of body work( im not patient enough to sand and smooth to make it perfect)

might print up some headlight buckets ordered a metal grill so i can scan that into fusion to design them off of


wish i could find the window set but appears discontinued


also going to test it out tomorrow at our local place will try to get pics of it in action. and try to break stuff or see what i need to change

 

[ben h]

went and got some time on it. thing preformed amazingly! redoing the panhard mount in steel tho made the same design on one of my other trucks and broke that one twice in a coupple hard rollovers. but gives a good excuse to design a winch bumper. i thought i wanted a servo winch but after holding one of my winch bumpers up next to it that changed my mind. could always use this as a dummy winch later when the holmes comes available but for now ill order another winch like this


did break my rear body mount after a coupple foot drop so not sure if i should keep that part printed to save the hard body or redo it out of metal and make the rear a hindge to make getting the body off allot easier

<a href="https://ibb.co/RCH0Ln3"><img src="https://i.ibb.co/0fJMPNC/jeep-thunderroad.jpg" alt="jeep-thunderroad" border="0" /></a>

<a href="https://ibb.co/Z8xZY53"><img src="https://i.ibb.co/4TpQYzc/jeep-thunderroad-2.jpg" alt="jeep-thunderroad-2" border="0" /></a>

<a href="https://ibb.co/HGzQdFX"><img src="https://i.ibb.co/sswrHmt/atl-pro-chassis-update.png" alt="atl-pro-chassis-update" border="0" /></a>

<a href="https://ibb.co/jGmKYnR"><img src="https://i.ibb.co/k0jnTN1/jeep-bumper-printed.jpg" alt="jeep-bumper-printed" border="0" /></a>

 

[ferp420]

you cant beat a 8 year old
you look at a line and say theres no way my rig will do that
the 8 year old is like ya i can fly my truck to the moon if i add this rocket motor lol
its amazing what you can do when you dont know you cant do it

 

[ben h]

you cant beat a 8 year old
you look at a line and say theres no way my rig will do that
the 8 year old is like ya i can fly my truck to the moon if i add this rocket motor lol
its amazing what you can do when you dont know you cant do it

lol right like i dont understand. we went to the local track this weekend and we show up he grabs his brand new rr10 bomber that i did a few suspension mods to and he drives up this rock wall like it was nothing. like most guys spend 5-10 min getting up it or cant make it he just drives right up...
love seeing guys reactions when he does that stuff

 

[ferp420]

lol right like i dont understand. we went to the local track this weekend and we show up he grabs his brand new rr10 bomber that i did a few suspension mods to and he drives up this rock wall like it was nothing. like most guys spend 5-10 min getting up it or cant make it he just drives right up...
love seeing guys reactions when he does that stuff

kid magic !

 

[ben h]

well the h-tech wheels showed up after usps being worthless for a few days!
awesome looking wheels but disappointed in there hardware. "looks" stainless but is super soft gunna order some nice stainless or maybe scale hardware?
worked good in the snow now i kinda wanna go run it this weekend but not sure yet


<a href="https://ibb.co/g45yt45"><img src="https://i.ibb.co/SfhNVfh/274696565-10221583650677710-8830465909892257193-n.jpg" alt="274696565-10221583650677710-8830465909892257193-n" border="0" /></a>


<a href="https://ibb.co/rvk2Jsh"><img src="https://i.ibb.co/hCsFvfN/274699477-10221583651757737-1328536574672453509-n.jpg" alt="274699477-10221583651757737-1328536574672453509-n" border="0" /></a>



<a href="https://ibb.co/gTRT6Q9"><img src="https://i.ibb.co/7W1WbBC/274727385-10221583652397753-9009663439210720354-n.jpg" alt="274727385-10221583652397753-9009663439210720354-n" border="0" /></a>



<a href="https://ibb.co/99bc241"><img src="https://i.ibb.co/27vWPMC/274732444-10221583652157747-7571010769054309784-n.jpg" alt="274732444-10221583652157747-7571010769054309784-n" border="0" /></a>


<a href="https://ibb.co/jkDN1qn"><img src="https://i.ibb.co/PGgLfJq/274667212-10221583652717761-8792973902048928982-n.jpg" alt="274667212-10221583652717761-8792973902048928982-n" border="0" /></a>


<a href="https://ibb.co/y4SqM8Y"><img src="https://i.ibb.co/Y0ZhKty/274534032-10221583652557757-8430432243676499842-n.jpg" alt="274534032-10221583652557757-8430432243676499842-n" border="0" /></a>

 

[MOguy]

Do you drive the TRX better than your own RC?

When you say he beats you what specifically does he do better? I have built a few TRX4s and they are grossly underestimated. Other than crappy steering and oversize and overweight bodies than can do pretty good out of the box.

 

[ben h]

Do you drive the TRX better than your own RC?

When you say he beats you what specifically does he do better? I have built a few TRX4s and they are grossly underestimated. Other than crappy steering and oversize and overweight bodies than can do pretty good out of the box.

his doesnt out do this one its mostly in referal to my other truck before i just redid that also. it was to top heavy and thats how he would do better then me at times

 

[ben h]

have been waiting on the bumper. parts finally showed up so welded it together and got it mounted! had to cut the body back a little for the winch wires to fit and not get cut up ( will have a different winch but have this for mockup)
kinda looks sweet!
waiting on a few metal parts to show up to make the rear body mount. cant print the one i designed in a strong way so making one out of metal ( broke on a small tumble)


<a href="https://ibb.co/T8H98C5"><img src="https://i.ibb.co/MVRFVXL/jeep1.jpg" alt="jeep1" border="0" /></a>


<a href="https://ibb.co/rFHBzpC"><img src="https://i.ibb.co/RYcXs6x/jeep2.jpg" alt="jeep2" border="0" /></a>

<a href="https://ibb.co/gv6J099"><img src="https://i.ibb.co/wJY4ngg/jeep3.jpg" alt="jeep3" border="0" /></a>

<a href="https://ibb.co/WB5QPfg"><img src="https://i.ibb.co/ssRh6qy/jeep6.jpg" alt="jeep6" border="0" /></a>


<a href="https://ibb.co/QHrtm5b"><img src="https://i.ibb.co/2MgHKbn/jeep4.jpg" alt="jeep4" border="0" /></a>


<a href="https://ibb.co/tm17mCQ"><img src="https://i.ibb.co/FxdSx7m/jeep5.jpg" alt="jeep5" border="0" /></a>