project "baloo", a tamiya bronco build

[sods]

Looks good. Ride height might be a little high, which might be a liability on the trail with the weight of that roof rack up top. Good looking Bronco overall though.

you were right grey machine, the roof rack did make her a little top heavy
at the scale comp the other week. over all I was happy w/ how she performed.
toyed with the idea of taking the roof rack off to help w/ the performance,
just couldn't bring myself to do it though.

 

[sods]

trail ride at pumping staion road

had a little time yesterday to take her out and stretch her
legs a little.

 

[Gear.Head]

thats a sick build! mines based off a cr01 too, can you show how you mounted the shocks to the axles?

 

[sods]

thats a sick build! mines based off a cr01 too, can you show how you mounted the shocks to the axles?

thanks gear.head"thumbsup"
the only thing I used from the cr01 was the body.
the axles are tlt's

 

[sods]

decided to go with the volt up, gear down theory.
so here's what I came up with........................
an evx-2 w/ 12, 14.4, & 16.8v battery set ups

 

[Crawlin4fun]

It's been reborn as a 1.5 rig with axial electronics, rc4wd steelies wrapped in pit bulls and some metal bumpers



http://i188.photobucket.com/albums/...5-07/29E43984-2508-41CB-B5EC-B70510CFA6C1.jpg

http://i188.photobucket.com/albums/...5-07/862A605D-BD35-4876-B41E-0A30A8091101.jpg

 

[lando450]

this thing is really nice i like that tamiya body here is mine with a proline body and vaterra ascender chassis. lol but my head lights are stickers.