Post your Crawlers!

[Mnster]

This is the Illinois Post your crawler thread."thumbsup" Post your crawlers and specs nothing more. Mods please sticky.
Super class clod

2x Hitec 5955TG's
2x Mamba max esc's
2x Hextronic BL motors
Homemade version of a TCS stick with changes.
Moab xl's
Axial 40 series beadlocks
TTR Cvd's
Integy gear sets
Inet C hubs
Castle BEC
Clod Axles



2.2 Comp rig

Custom chassis made from 1/4 brakeline
Hitec 5955tg
Quark33 with a OG revolver
Castle BEC
Full MIP CVD's
TLT axles
Towerpro 995 dig servo
Custom dig setup
Losi Rock claws
Gmade Beadlocks

C-10 Beater truck

Custom chassis cut from 1/2 square tube
Wheely king axles
Leaf sprung
Imex Square tires on stock WK wheels with Gmade beadlock rings.
XRS speedo
Tower pro 995
Custom interrior with John boy behind the wheel and bruiser dash.

Bronco Bruiser

Stock Bruiser
HPI bronco body
Imex swamp dawgs
Tower pro 995 servo
Runner ESC


Tacoma Jero

Tamiya cc-01 chassis
Radio shack enforcer body
Custom 4 linked rear
Custom sliders and bumper
Custom interrior with Jim driving
Tower pro 945mg for steering.
Tower pro 995mg for winch.
Tower pro mini servo for steering wheel.
LED headlights with custom molded buckets.
Trail doctors on Hpi stock car rims.
Cheap Fly 33 Car esc
Small Crawler store BL motor
Custom gear reduction unit
to much more to list.

Snow Blazer

Mamba max
12 cells
Hacker Bl motor
Tower pro 995
Stock TLT chassis plates modded
Axial axles

 

[Soya]

Twin Force axles
4.3 Helical gears
aluminum lockers
RC alloys shafts
RC4WD knuckes
Hobbico front servo (420 oz in.)
GWS rear servo (800 oz in.!)
Savage shocks
Custom wideners
Custom tube frame
Custom servo and link mounts
Revo shafts
Emaxx tranny with steel idler
Hyperion outrunner
Castle BEC
Mamba Max with 11.1v 3850 lipo
Jumbo Kongs
Spektrum DX3
probably more stuff I'm forgetting

Also have a comp clod in pieces somewhere.

 

[MattG]

 

[clod & bruiser]

representing central illinois!"thumbsup"

novak rooster crawler edition esc
novak fifty-five 55t motor
slight 11 3/4" stretch
rc guy lockers front rear
traxxas driveshafts

http://i169.photobucket.com/albums/u233/Panthers_21/wheely king bashing/Picture341.jpg

http://i169.photobucket.com/albums/u233/Panthers_21/wheely king bashing/Picture184.jpg

http://i169.photobucket.com/albums/u233/Panthers_21/wheely king bashing/Picture155.jpg

 

[envious8420]

txt axles and tranny
1/2x1/2 steel frame rails
everything else is 3/16 or 1/4 steel line
narrowed nylint body
rc4wd alu knuckles
750 bruiser motor on 12v

 

[clod & bruiser]

txt axles and tranny
1/2x1/2 steel frame rails
everything else is 3/16 or 1/4 steel line
narrowed nylint body
rc4wd alu knuckles
750 bruiser motor on 12v

yeah you got me on that pics man i had to quadruple -take on that on! haha awesome truck!

 

[wrcfan29]

Bily Q's AX10

Yeah this is my ax10 that most of you saw at the comp in naperville.

i'm running a clear rockstar body with protective film and a big squid sticker
novak rooster crawler with the 55t motor
hitec 5645mg servo tq-3 radio
pro-line moabs-m3
was running tcs bent links at the comp but now received delrin bent links from xtreme rc

 

[Slip&Slide]

12 IN wheel base
Moabs
Pede wheels died black
7 oz weight in each
55t lathe motor
tazer esc
axle mounted servo
4 link
locked front and rear

 

[addictedtonitro]

Jefferson chassis
tlt axles
12.5 wb
pede shafts
pede tranny locked with all steel gears
revo lowers
hpi uppers
maxx shocks
had integy 45t now integy matrix 60t
tekin rebel 2 esc
had moabs on rpm crawler wheels
now rock claws on axial black chrome beadlocks
Proudly representin the south!

 

[BJoe]

 

[tkd630]

 

[ghosty1]

 

[BJoe]

 

[xirtic]

2.2 Class
-Reign J2-TT Narrow Chassis
-RC4WD R2D Transmission
-Novak Goat ESC/Motor
-RC4WD Punisher Driveshafts
-Axial HD Gears
-FreakStuff Racing Stainless Steel Lockers
-RCP Rear Lockouts
-CKRC Front C's and Hubs
-TCS Dig Servo Mount
-Cen Skyion 144oz Dig Servo
-Hitec HS-5955TG Steering Servo with aluminum arm
-RockSmith Engineering Titanium Steering Links
-RockSmith Engineering Solid Amuminum Upper Links 70mm
-Custom 5/16" Delrin Bent Lower Links with Traxxas Ends
-Losi Crawler Shocks in a Droop Config (80wt front and 60wt rear)
-Cougar Panther Tires
-Montana Scale Design solid aluminum beadlocks
-Kreepy Red Memory Foams with 1/4" Proline FIRM Foams on the outsides in the front tires.
-Panther Memory Foams with 1/4" Proline FIRM Foams on the outsides of the rear tires.
-Aluminum Hex's
-TCS 4 link rear plate (Delrin)
-TCS 4 link servo mount plate front (Delrin)
-TCS Axle mount battery trays (Delrin)
-Custom lexan ESC tray on front upper links
-EFlight 7.4v 20C 1250mah Lipo
-Spektrum AR6000 RX
-Spektrum DX6 TX (Throttle Spring, Voltage Regulator, Internal Antenna, and DX3.0 Battery Conversion Mods)
-JConcepts RockSteady body

 

[98tjjeep]

4 sale

I'm not sure if i can put this here sorry if its a issue.
For sale : axial ax-10 orange (ARTR) with front and rear bent links as well as the stock ones, Q3 radio and receiver, up graded drive shafts, 55 turn Integymotor,Tekin FXR Forward/Reverse Brushed ESC, Hitec hs-5645mg servo, 7.4v-2000mah lithium polymer 2 cell battery with charger, equalizer and power supply. almost new used about 4 or 5 times. will take $375 for all plymouth IN.

 

[BJoe]

Here's a pic of my LMRC on some rocks not far from home or work

Here's a basement crawling vid too"thumbsup"
WARNING: Elvis Memorabilia Content:lol:


BTW, that was easier said than done. I held the camera with my right hand and tried to drive with my left......the wheel is barely far enough left to allow for steering with my thumb:roll:"thumbsup"

 

[Ecuador Crawler]

My Rig

 

[BJoe]

Nice one there Ced!

 

[sally1800]

The ROCK

Tekin RS 21.5 3s lipo
Castle Creation BEC
Hitec HS 7955TG (steering)
Hitec HS 7965MG (Dig)
Pro-Line Epics
Pro-Line Chisels

 

[xirtic]

RC4wd Bully Axles
RC4wd 11 tooth pinions
Kamikaze Zero T Chassis (Black)
Castle Creations Sidewinder ESC (x 2)
Castle Creations BEC
Castle Creations 4mm Gold Motor Plugs
Novak 55T motor (x 2)
Novak 14ga Silicone Wire
Hitec 5955 Servo
Dynamite Aluminum Servo Horn
Montana Scale Design Wheels
Panther Tires
Kreepy Krawler Red Foams
Spektrum DX6 TX (Radio Mixed Dig)
Spektrum AR6000 RX
Custom 5/16" Delrin Straight Upper Links (5" length)
Custom 5/16" Delrin Bent Lower Links (5" lenght)
Custom 1/4" Delrin & Threaded Rod Torsion Links
Custom 5/16" Delrin Drag Links
Custom 5/16" Delrin Body Post Mounts
Custom Aluminum Steering Servo Bracket
Custom Lexan Upper Link ESC Trays Front & Rear
Traxxas Rod Ends
CKRC Baja Bug Body
Parma 3" Body Posts
Pactra Comp Orange Paint backed with Pactra Indy Silver
Associated Chassis Protector for the Axle Bottoms
Firestone Lead Stick-On Wheels Weights (6oz each front & 3oz each rear)
3 Cell Lipo (1500mah 20C Constant to 25C Burst)
Deans Connectors on all power connections