Post pics of your 2.2 Comp rigs and specs!

[isawul00k]

"thumbsup"

 

[farlok72]

Venom creeper Remmuh inspired build (if you see this.. Thanks for the idea)

 

[minicrawlerguy530]

Here are mine and my little brothers rigs. One scx10. One venom creeper. And one Losi night crawler. Axial has too much to list. Creeper is basically stock other than an integy 55t motor and some rovers. The Losi has a centered and flipped trans, Novak goat 2s, hitek 7980 servo, all spektrum.

 

[Hi-Intentionz]

1. Wraith castle 4pole 3800kv jr ds8711 servo MIP driveshafts
2. Axial honcho Novak crawler esc integy 45t brushed motor hi-tec 645mg servo
3. Venom creeper comp.
LRP crawler combo brushless 21.5t
Too much more to mention.

 

[DEynon]

SCX10 Stock 20t waterproofed ESC, Traxxas 2075 waterproof servo, 5000mah 2s lipo, Mickey Thompson Baja Claws, All Aluminum Links, 3racing winch..

Axial Wraith...Castle SV3 4600 combo, Losi Shocks, Emaxx shafts, etc....

 

[DEynon]

 

[kakachille]

my lr3

 

[jtp]

WK's stretched to 14"
17.5T sensored brushless in JK 21.5T in truck
HPI Q-base

 

[W1ck3d0n3]

Heres my Axial Xr10.

Motors- Novak 55t
ESC- Novak M2 Dig
Steering- HITEC HS-645MG
Body- XR10
Top Links- Axial 6x101mm -30
Bottom Links- Axial 7x94mm
Shocks- Axail Aluminum shocks
Rims- Stock XR10 bead locks
Tires- Hot Bodies Sedonas

 

[Norton]

When it was fresh.:lmao:

 

[RockKook]

Mine - yellow bug:

P4 Chassis
Tlt axles
R2D trans w/Hitec 5645 for dig
Axiom 55t motor
Mamba Max
JR 8711 servo
CC BEC
8 cell Elite 1500's

DJ's (my 12year old son) - red bug:

Modified AX-10 chassis
GPM 110mm shocks
AX-10 axles
R2D trans
Integy V10 handwound 50T
Mamba Max
Hitec 5955 servo - steering
Hitec 85mg servo - dig
CC-BEC
6 cell elite 1500's

NICE RIGS....for the paint and body....what did you do for carbon fiber? Vinyl, paint.....??? Specs are impressive too....I'm just looking for a CF direction. Thanks for showing all.

 

[slammedyota91]

Axial wraith poison spider
14" wheelbase
12" wide
Vp axle shafts in the front
Vp locker in rear diff
HHS expert torque master 35t
16t pinion
87t spur
Protek 150t steering servo (426oz/in) @7.4v which is what my bec is set to.
Mayhem billet beadlocks with 2.2 SEDONA tires
Vp links and steering
Vp cms
Vp pan hard bar
Str steering knuckles

 

[Hi-Intentionz]

R

 

[rockpunisher]

Some pics

 

[Shinchu]

New guy here in san diego.
Bought a used rtr yeti with upgrades already on it.
Slew of strc, vanquish, and ssd parts but still has rtr electronics.
Just got proline xt yeti shocks, installing soon.
Currently sitting on proline badlands tires, looking to go for more of a koh u4 look soon.
Meanwnile i hit the outside of the body with plastidip so it doesnt look like every rtr yeti we see.

 

[CWFab]

Capra ultra 4 chassis I’m still building