my K10 cystic fibrosis tribute built - 2 speed with a twist, dual winches Pic heavy

[Natedog]

If you could get away with a six channel receiver the hobby king ones have the plugs pointing upwards and fit really well in the box �� And they bing no problem with the gt3c. Or de case the 8 channel to gain a few mm �� That's how I'm running one in a summit looks good dipped in plastidip ��

Good points, but a bottle of conformal coating and a small paint brush are much better at water proofing than plastidip."thumbsup"

 

[bradyrx70]

Yep that's what's in my ascender although my gt3c is hacked but shouldn't make any difference
Cheers Andy

 

[bradyrx70]

Thanks Natedog��

Plastidip was what I used about 3years ago before I found out about conformal coating lol

Cheers Andy

 

[2k2wranglerx]

made some progress.

lights are running off the radio. i still have to get the headlights in. using 10mm prewired LED's for headlights. i had a ton of them and i can't find the bag lol. so i'm waiting on those to come in. But anyway, in the meantime...

https://youtu.be/IoojIym1ZLU

i have both winches running. Front is running of it's on 600 mah 3s lipo from an RC plane and has it's own 60 amp ESC. Rear is using a rc4wd wired setup to the 4th channel.

https://youtu.be/yeOczQOQmtU

still fine tuning the 2 speed. i may change out to a full size servo at some point.

https://youtu.be/wDyiOGwR2_g

 

[NateR OG E-revo]

why not just get the dual motor winch?