Members' Rides - No talking

[WOUrugger51]

here's my Bully.

• Bully V2 Axles (lightweight in rear, cast in front)
• Juice chassis
• T1E Moonbuggy rear lower links
• Stainless straight links front
• FXR w/ Punk Dig
• 2x 35T Holmes Epic Handwounds
• Hitec 7911 High Voltage servo
• VP .7" SLW V3 wheels
• Losi 4" shocks w/TCS small spring mod
• Xirtic steering bracket w/ LCC tie rod
• Gunnars awesome body mounts

 

[vwboosted]

Props on the VW body "thumbsup"

 

[Hvrc]

Old picture.
ax10
sidewinder esc
vxl 3500kv motor (32p 9/58)
homemade steel bottom links
Homemade steel steering link
Rear shocks- emulsion duratrax bodys, trx Tin shafts, non progressive trx white spings
Front shocks- Traxxas ultras. Plastic bodys, aluminum caps, axial Tin shafts, duratrax green spings
stampede vxl tranny locked
stock axels w/ lockers
wb: 12.7"
Height: 8"
Legnth: 17 1/2"
Ground clearance
Skid: 2.4"
Front diff: 1.5"
Rear diff: 1.6"
stock beadlock wheels
proline moab m3 tires
1 1/2 lbs in each front tire
tower pro hitourqe servo
no bec yet......
no dig......
dalewheat.com "tiny cylon" red led rear display
glorcs hat lamp
old duratrax body
hacked pede body

 

[LR3]

Truck Base : Tamiya XC/CC01

ESC: Standard Tamiya

Motor: intec 55t

Servo: Hitec Deluxe HS-485HB

Trans: Does the CC have a trans?

Axles: Standard Tamiya

Tires: Losi Mini Rock Bashers

WB: 8 in.

Overall Width: 7.3 in.

Diff clearance: Front: about 1.5 in.

Center Chassis clearance: 2.5 in.

Overall height: 8.5 in.

If this is posted in the wrong place please correct me

 

[da808titan]

Rig: Tamiya High lift. added on 2.2 rc4wd crawler tires,4-link,servo moved to the axle, nissan titan body....electronics suck and motor is black can......

 

[Rig Rocker]

Here's my VP AX10 Shafty Rig

 

[RobCrawler65]

It's been a while since I've posted....

Been away for a while(5 years)Back then I built this abomination with help from this site.

The hobby sure has changed in 5 years...lot's of cool stuff available, so I picked up an Axial Scorpion ARTR.

Right now it has the stock axial 55 turn motor and Traxxas XL-5 ESC, reciever and 2056 servo that I robbed from my stampede just to get me by. I added a set of Rovers and have the Novak Rooster Crawler/55 turn motor combo and a HiTec 645MG servo on it's way. I also plan on adding weight to the wheels and mounting the battery on the front axle. It's good to be back in the old money pit!

Robert

 

[Oso787]

Gmade R1

 

[Ndnchief10]

Truck Base : axial ax-10

ESC: outcry esc

Motor(s):rc4wd 35t can

Servo(s): hs645mg

Trans: stock

Axles: axial(stock)

Tires:rovers (white)

WB:12-1/2~

Overall Width:10-1/2"

Diff clearance:1-1/2"

Center Chassis clearance:2-5/8"

Overall height:6-5/8"

Truck Base : losi micro rockcrawler

ESC: stock esc

Motor(s): stock

Servo(s): stock

Trans: stock

Axles: losi(stock)

Tires:losi claws (stock)

WB: 5"~

Overall Width:3-3/8"

Diff clearance: 9/16"

Center Chassis clearance:3/4"

Overall height: 2-3/4"

 

[Jake]

Truck Base: Axial

ESC: FXR

Motor(s): 55t Integy

Servo(s): JR 9100

Trans: Axial

Chassis: GC2

Axles: Axial

Tires:White Dot Rovers, with Nova's, VP Dirty Hairys up front, and SLWs out back

WB: 12 1/4

 

[Motorhead]

My RTR bully, new hobbico high tourque servo and metal rods ends are the only thing Ive changed
Maxamps 1550 man 3s lipos

 

[Lazytrain]

my LCC MoA. "LazyExpress"
cut n flipped chassis
35t/rooster
punkdig
9100t
leopards
6 3/4" overall height
3 1/2" clearance

 

[lowridinjuggalo]

this thread is 5 years old im board and went from page one all the way threw.. it interesting how the crawler have changed over the years

 

[MRCking]

Bling it bitches! Monster energy tuber! Color Changing Paint!

:mrgreen:

 

[MRCking]

This is the truck I use to run to and from the shop!

"thumbsup"

 

[rockabelly]

 

[Rokpile]

My crawler is quieter than expected and smooth like butter.
I even went as far as throwing my own paint job on the body,
and I just want to say that I am getting better at painting these little
things and really like this paint scheme. This is my 5lbs.3.5oz. cralwer in comp form.

and I actually had three done and running at once :applause:

 

[dont slow down]

Guess I'll throw mine in here:

Tamiya TXT-1, needs new axle cases
Twin 550's
Cut and modded chassis
BTA Steering

Tamiya Tundra High Lift
Mostly stock
Mud Thrashers
Full LED's
Custom brass hitch and hitch cover

The newest member of the family: Losi Comp Crawler
Novak brushless crawler esc/motor
Delrin lower links
Delrin OTA steering link
Proline Rockstar body

 

[torinotroy]

heres my axial with a proline f250 body

 

[rmdesignworks]

My 2.2 Pro Creeper with RMDesignworks Vulture chassis
RTR WT. 6 lbs 3.2 oz.
WB 12.25-12.5"
2.2 Pro Rig
Rovers White Dot siped
RMDW Paradox Dual Disk Foams
RMDW Paradox Pin Lox cvd pin retainers
55t motor
Axle plates f/r---rear for proper link geometry and battery relocate,stock front for BTA
RMDW VULTURE CHASSIS
RMDW Paradox Axle Trusses coming soon
CC BEC 10amp
Novak Rooster Crawler
Novak Smart Stop 3S Lipo Cut-off
3S lipo
Lipo on rear axle
Traxxas Steel yokes and Long Truck Shafts cut to fit
Losi 4" shocks w/ White springs and 25wt oil
Spektrum DX3E 2.4 ghz , 3rd channel for DIG
Spektrum S200 dig servo
RMDW Custom Dig servo mount
METAL Putty locked lockers
Hot Racing Aluminum C's
Hot Racing Aluminum knuckles
Hot Racing Aluminum rear lock outs
2.2 1.5" wide CKRC Link "Murdered Out" Wheels w/ Berg Gold rings
Shaved axle housings
RMDW Flex Skid
Modified front suspension for 52* steering angle
Front Links and shocks moved inboard
Stock Creeper cvd's