• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

lipo and novak rooster combo

sidewaystreak

Quarry Creeper
Joined
Jan 16, 2010
Messages
212
Location
north phoenix
i recently acquired a couple of 2s lipo 1800mah 20c .... i was wondering if anyone has experience any problems running lipo in their rooster esc motor combo... any advice tips... im not experience with lipo so its new to me"thumbsup""thumbsup""thumbsup"

thanks in advance
 
I've ran 2s 1600 mah lipo with Rooster/55t and 14t pinion with no problems ....almost 2 hours of runtime too "thumbsup"
 
I've been running 3S 2200mAH with an external BEC without issue. Works very well.
 
nice thats what id like to hear..... conversion will done by tomorrow.... woot woot thanks again for the info....


07crawler... havasu was off the hook springbreak this year....
 
Check the instruction sheet that came with the novak rooster. It has two modes, one for Nicad / Nimh and a second mode for Lipo. In Lipo mode there is a low voltage cut off.


Do you have a copy of the instructions, i dont have mine and cant seem to find a copy of it on the internet!
thanks
 
the instructions are at teamnovak.com but make sure you have the lipo cutoff turned on cause they cant drop below 6v trust me i know lol ruined 2 lipos the hard way lol:lmao:
 
Is there any difference if I have two motors and one Novak Rooster esc ?
Do I have to have two lipo batteries if I have two motors?
 
i run a rooster crawler on 3s with 4ws(two hitec 5645's) with no external bec
, it has never cut out either. Dont ask me how, but it works!
 
Back
Top