Hummer hard body ideas???

[jh1985]

I scored this at the thrift store today. I was building a scxh3 truck and it was looking good but is just too small for the scx10. So i saw this and grabbed it. Its 1/10 scale 10.3 wheel base. It wasnt even a rc it was just a push around toy for kids.
So Im looking for ideas. Im going to use this on my scx10 instead. I dont think i can pull off the same kind of truck build because of the doors on this one. But i Could Cut the back Behind the door off.
Im looking for any and all ideas to add some apeal to this body. Thanks heres the pics.
I might even sell the h3t in the last two pics if anyone is interested.

 

[Super]

I started out with the same style Hummer and ended up with this...

 

[jh1985]

Thats cool. what set of fender flares are those. And those rear lights?

 

[jh1985]

I started out with the same style Hummer and ended up with this...




Hey do you know any big scaler get togethers in Wisconsin worth making the trip from MN?

 

[canuckcrawler]

Here's a link to what I did with one of those
http://www.rccrawler.com/forum/paint-body/475422-h2-h1-conversion.html?highlight=conversion

 

[lt1zwb96]

I got one of these, has 12.5 wb, about 8 wide.
Licensed 1/10th Hummer H2 RC Diecast RTR (Green)

 

[Super]

Thats cool. what set of fender flares are those. And those rear lights?

Those are dingo flares and the lights are axial lights.


Hey do you know any big scaler get togethers in Wisconsin worth making the trip from MN?[/QUOTE]

We are planning a gtg at governor dodge state park July 4th weekend. There is a thread on Wisconsin board if you're interested.

 

[R2j]

Here is mine, basically the same body as yours. I threw on some JK flares.

 

[jh1985]

Here is mine, basically the same body as yours. I threw on some JK flares.
Nice
I like the jk flares. I want flaress bought the dingo ones but they were huge. I just couldnt picture making them look right. Ill try the jk flares thanks.
View attachment 270902

Those are dingo flares and the lights are axial lights.

Cool Thanks


Hey do you know any big scaler get togethers in Wisconsin worth making the trip from MN?

We are planning a gtg at governor dodge state park July 4th weekend. There is a thread on Wisconsin board if you're interested.[/QUOTE]

Ill have to check that out. Its about a 3 hour drive from the twin cities I could make a weekend out of it. Is there a Casino anywhere around there that you know of?

Here's a link to what I did with one of those
http://www.rccrawler.com/forum/paint-body/475422-h2-h1-conversion.html?highlight=conversion

Wow thats some great work Looks like you built a whole new truck. Looks like a h1 now. Im impressed. I gives me some ideas.

Thanks alot everyone.

Keep em coming.

Im going to make a 4 door truck for sure. I might make a removable backend.

 

[Super]

Ill have to check that out. Its about a 3 hour drive from the twin cities I could make a weekend out of it. Is there a Casino anywhere around there that you know of?


Yeah, it's about 3 hours from my place too. I see that there is a casino near Wisconsin Dells . Vegas nights casino in Spring Green Wi. You'll have to check it out I'm not a casino guy.:mrgreen:

 

[jh1985]

Ill have to check that out. Its about a 3 hour drive from the twin cities I could make a weekend out of it. Is there a Casino anywhere around there that you know of?


Yeah, it's about 3 hours from my place too. I see that there is a casino near Wisconsin Dells . Vegas nights casino in Spring Green Wi. You'll have to check it out I'm not a casino guy.:mrgreen:

I figure it could be fun. Play with the trucks all day, Check into the hotel for the weekend and do a little gambling at night. Im more thinking that the casino might get the old lady more reason to go. Im sure that would make an easier proposal than lets go drive my crawlers and stay in a motel 3 hours away. lol.
Thanks man.

I cut the back off. Im going 4 door truck style. Like yours but without the small back windows.

 

[Super]

I hope you can talk the other half into going."thumbsup"

I wish I would have left the little window out. I think it'll look better.

 

[jh1985]

I hope you can talk the other half into going."thumbsup"

I wish I would have left the little window out. I think it'll look better.

We will figure it out. :???: Ill add a link when I Get far enough in the build to start a build thread. Taking pictures as I go.
TTYL gotta make this wraith axle mod for scx10 thread I told a few people I'd have it done this weekend. I'm gonna go get er done.