Gmade R1 Battery Size

[Crawl On]

I'm getting the R1 RTR that needs 7.4 v Battery I need to no the dimensions so I get the right size. Thanks

 

[mikemcE]

Where do you plan on mounting ? Outback, up high or on the axle ?


Hang up and Drive

 

[Thinkcooper]

I'm getting the R1 RTR that needs 7.4 v Battery I need to no the dimensions so I get the right size. Thanks

This is a great question with a slew of different answers. I'm running 2S 60C 3800-4000 amp shorty hardpack packs, because I have some on hand. They sort of fit in the battery tray, sticking out the back a little. They fit well atop the front axle with the optional Gmade axle mount. Smaller batteries will give you more options.

 

[Crawl On]

At first in back then over front axle with LCG kit. Thanks I will get a couple shorty's. Crawl ON

 

[mikemcE]

I'm running 3s 1300mah on the axle, about 50c, they last 30 minutes each, I use Scotch extreme fasteners with an o ring.

On my comp crawler I'm running smaller Brood 850 mah 35c 3S, get about 20 min each

I don't want all the weight up top on mine, so I never ran anything larger in size


Hang up and Drive

 

[Thinkcooper]

I'm running 3s 1300mah on the axle, about 50c, they last 30 minutes each, I use Scotch extreme fasteners with an o ring.

On my comp crawler I'm running smaller Brood 850 mah 35c 3S, get about 20 min each

I don't want all the weight up top on mine, so I never ran anything larger in size



Hang up and Drive

Those are downright svelte!

 

[mikemcE]

I was happy with my broods, as I don't comp yet run time is practice. And I can run 3 batt Back to back, no heat issues, just parts failures, but all 4 cvds are gone now


Hang up and Drive