Flysky VS DasMikro receivers

[bbrigg]

I'm adding another 8 channel receiver for my hacked GT3C which are fairly close in price. I'm not too concerned about the DasMikro being uncased as I will be adding conformal coating to whichever I buy.

The small size of the DasMikro is a plus but I was wondering how the DasMikro receiver compares to the Flysky FS-R9B for range and reliability. Anybody out there got any tips?

Sent from my LG-H870DS using Tapatalk

 

[JatoTheRipper]

Do you have a link to the DasMikro receiver? Is it completely compatible with the FlySky transmitter?

 

[bbrigg]

Just search eBay, Aliexpress or Banggoods with "DasMikro AFHDS". DasMikro also do upgraded 8 channel GT3C transmitters with extra switches etc. One plus on their receiver is that it handles 2S voltage.

Sent from my LG-H870DS using Tapatalk

 

[JatoTheRipper]

Just search eBay, Aliexpress or Banggoods with "DasMikro AFHDS". DasMikro also do upgraded 8 channel GT3C transmitters with extra switches etc. One plus on their receiver is that it handles 2S voltage.

Sent from my LG-H870DS using Tapatalk

FlySky receivers can't handle 2S? Since when?

 

[bbrigg]

I'm just going on the quoted spec of 6.55V. If you are sure they run at 8.4v that is a good thing.



Sent from my LG-H870DS using Tapatalk

 

[JatoTheRipper]

I'm just going on the quoted spec of 6.55V. If you are sure they run at 8.4v that is a good thing.



Sent from my LG-H870DS using Tapatalk

I have the FlySky GT5 and its FS-B6 receivers are rated up to 8.4V. It's crazy if the GT3 receivers are only rated to 6.55V!

 

[bbrigg]

That's what Flysky says they are rated to. You have to remember that these receivers came out long before the gyro enabled one.

Sent from my LG-H870DS using Tapatalk

 

[JatoTheRipper]

That's what Flysky says they are rated to. You have to remember that these receivers came out long before the gyro enabled one.

Sent from my LG-H870DS using Tapatalk

Yeah that's crazy these days. Good to know there are other options out there.

 

[bbrigg]

Another thing that makes the DasMikro attractive to me is how easily you can apply a conformal coating. The back is flat so servo tape could be used to mount it.

Sent from my LG-H870DS using Tapatalk

 

[nightcrawler48]

Info on the Banggood website states "Power: 3.7V - 9.6V".

https://www.banggood.com/DasMikro-8...C-Transmitter-p-1175216.html?cur_warehouse=CN

 

[soze]

Hmm, I'll have to consider these. One issue I do have is the big housing on the FSR6B 6ch receivers. If I could get these and just 3D print housings, that'd be perfect!