fallin apart
Quarry Creeper
I got the parts laying around!
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Fallin Apart's BWD 'Low Pro' Wedge Build
- Thread starter fallin apart
- Start date
I got the parts laying around!
papabash
I wanna be Dave
Well you know that if I build one, I'm going to expect you to do the same! :mrgreen:
I'm still kickin' around options right now, though. I'm not in a big hurry to do anything just yet.
fallin apart
Quarry Creeper
Congrats on your first place at states! Wish I could've been there to give or receive a beating
Thanks, I have been struggling driving this truck all year until Dave/ Papabash tune it.
fallin apart
Quarry Creeper
All the 1.9 truck from our club that were there
Caleb (captian of crunch) and I
OldManBash oopps I mean papabash
Me and my Dad (unpredictable)
And a picture of all of us
and there was a reporter there and we ended up getting interviewed
Columbia hosts Missouri Rock Crawlers State Championship - Columbia Missourian
Caleb (captian of crunch) and I
OldManBash oopps I mean papabash
Me and my Dad (unpredictable)
And a picture of all of us
and there was a reporter there and we ended up getting interviewed
Columbia hosts Missouri Rock Crawlers State Championship - Columbia Missourian
Last edited:
EverettY
E.Y. Designs
Nice looks like a lot of fun poor Caleb he's the only one without a mini wedge low-pro....
poor Caleb he's the only one without a mini wedge low-pro....
papabash
I wanna be Dave
Nice looks like a lot of fun
It's a Mini Wedge, just not the Low-Pro. It does so well the way it's set up that it's tough to justify changing it over. "thumbsup"
Last edited:
papabash
I wanna be Dave
That's Captain of Crunch... Geesh, Nixa schools are soooo bad! :lmao:
Watch it there, son number 2, I can always un-adopt you! :mrgreen:
Dang, I wish someone would have told me to pull my pants up before the picture, they're darn near on the ground!And a picture of all of us
:lmao:
fallin apart
Quarry Creeper
That's Captain of Crunch... Geesh, Nixa schools are soooo bad! :lmao:
Watch it there, son number 2, I can always un-adopt you! :mrgreen:
DO IT! I DARE YOU!!!!!!!
Dang, I wish someone would have told me to pull my pants up before the picture, they're darn near on the ground!
Going for that 51 year old ganster look "thumbsup"
EverettY
E.Y. Designs
Ya I know that it was a wedge.... Is that the one that you won states last year with?
i was thinking the same thing :ror:
fallin apart
Quarry Creeper
No he was driving a different rig from a different company until he drove my mini wedge and decided he wanted one then.
http://www.rccrawler.com/forum/losi-mini-rock-crawler/328490-papabashs-mini-moonbuggy.html
fallin apart
Quarry Creeper
At least I didn't have to make 2 accounts like Caleb (Caption of Crunch and Captain of Crunch) Geesh Ozark schools :lmao:
papabash
I wanna be Dave
This is actually my 2nd rig (both BWD) since winning last year. My regular Mini Wedge far outperformed my "old" rig without even tuning it. The Low-Pro feels just a bit better than the standard Mini Wedge (to me), but it's really close.
Last edited:
fallin apart
Quarry Creeper
Dave you have had so many 1.9s it's hard to keep track :ror:
also went out and practiced a little with the mini on my little course and here are some pictures
Looks like it's time to break out the JB Weld again that makes twice now where the srew got pulled out of the rodend
and also had the front drivshaft come out
papabash
I wanna be Dave
Oh I still have them all, they're just in various stages of dismantling from having parts robbed from them. Gotta keep a good supply of spares, you know! Guess I really should break down and sell 1 or 3...
Forget the JB Weld, put a new rod end on with a longer set screw. I got several different lengths of M3 set screws off the Bay. Always a handy thing to have.
I'm not even going to ask if you used the grub screw this time.... :roll:
Sorry, couldn't resist that last one, champ! :mrgreen:
fallin apart
Quarry Creeper
Had our latest comp this last Saturday and ended up taking 1st with the mini and had a great time out there until the last course in 2.2 where my xr went for a swim.
I think Dave/papabash gave the 1.9 a special touch were it handles so much better now, thanks again I will have the video up later tonight but heres my Dad running the last course we had
Bwd 'low pro' - YouTube
I think Dave/papabash gave the 1.9 a special touch were it handles so much better now, thanks again I will have the video up later tonight but heres my Dad running the last course we had
Bwd 'low pro' - YouTube
Last edited:
winnerone23
I wanna be Dave
Well I can't see the video on mobile... Congrats on the wins! Wish I had more comps around my area! Scores look great! Sucks ur 2.2 went for a swim! Mine did once, lost a rx.. i was catching it as it guy the water an really didn't have time to submerge..
papabash
I wanna be Dave
Hey Austin, bring that rig back over to the house when you get a chance, I think I need to work on it again. 8)
Seriously bud you drove your butt off, you deserved the win!
Seriously bud you drove your butt off, you deserved the win!
fallin apart
Quarry Creeper
kawboy17
Pebble Pounder
Nice vid, rig looks smooth and handles good. Can't go wrong with the BWD products, I love mine.
