apex
Newbie
I'll be watching this build like a hawk! It is looking excellent so far.
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
f-350 scx10ii build (picture heavy)
- Thread starter wcdfmt510
- Start date
Thanks. I've been putting alot of effort in this when I have free time... Never satisfied when I build something. So I redo it a few times.. but this truck will be amazing when done..
Sent from my Moto Z (2) using Tapatalk
Rebuilt the cab back. Used what was left of the original bed floor I had laying around.. had to notch the back to fit down the frame rails. set the cab on the body. Still fine tuning the rear cab height. Thinking the front is fine. This is with the suspension fully extended. Definitely need to get some beefy front shocks with some stiff springs... Probably gonna slightly trim the edges of the wheels Wells on the bed.
Sent from my Moto Z (2) using Tapatalk
Sent from my Moto Z (2) using Tapatalk
Just received a few parts from RPP HOBBY today.
Vp scx10ii 6 bolt spool
Yeah racing 80mm threaded tubes
Rc4wd 180-220mm ultra scale driveshaft for the rear.
I'm loving how real this driveshaft looks. Pictures don't do justice.
Not sure what the 80mm threaded tubes will be used for yet. But I just wanted to get all the sizes they have for shits and giggles. I'll find some uses for them eventually...
That tiny ass wrench for the driveshaft flanges is ridiculously small...lol
Sent from my Moto Z (2) using Tapatalk
Vp scx10ii 6 bolt spool
Yeah racing 80mm threaded tubes
Rc4wd 180-220mm ultra scale driveshaft for the rear.
I'm loving how real this driveshaft looks. Pictures don't do justice.
Not sure what the 80mm threaded tubes will be used for yet. But I just wanted to get all the sizes they have for shits and giggles. I'll find some uses for them eventually...
That tiny ass wrench for the driveshaft flanges is ridiculously small...lol
Sent from my Moto Z (2) using Tapatalk
Yes it's awesome looking. And yes. It hurt me to pay that. But owell it's just money.....I might even have to cut the long side down about 10mm maybe.
Sent from my Moto Z (2) using Tapatalk
No progress on the rig due to being very busy... Plans are to at least get it sitting on it's own wheels and tires.
Options I'm looking at for wheels
SSD 1.9 assassin (silver or bronze)
SSD 1.9 rock racer(silver)
SSD 1.9 champions(silver/ blue)
Vp 1.9 method 310 (clear)
Vp kmc XD229 machete (grey or clear or black)
Rc4wd 1.9 fuel off-road maverick (black)
Options for hubs
SSD RC Wheel Hub with Brake Rotor x2
Vp .225 slw hubs
Vp .325 slw hubs
Options for tires
Rc4wd 1.9 Michelin X[emoji2400] Force XZL+ 14.00 R20 4.23" tall
Rc4wd 1.9 Atturo Trail Blade X/T* 3.95" tall
Rc4wd 1.9 Fuel Offroad Mud Gripper 4.33" tall
Rc4wd 1.9 Atturo Trail Blade M/T 4.25" tall
Rc4wd 1.9 Goodyear Wrangler MT/R 4.19" tall
Options for foams
Crawler innovations Deuce's wild 1.9 4.0-4.4
Crawler innovations Deuce's wild 1.9 3.85-4.19
Obviously foams depend on what tire I get
Sent from my Moto Z (2) using Tapatalk
Options I'm looking at for wheels
SSD 1.9 assassin (silver or bronze)
SSD 1.9 rock racer(silver)
SSD 1.9 champions(silver/ blue)
Vp 1.9 method 310 (clear)
Vp kmc XD229 machete (grey or clear or black)
Rc4wd 1.9 fuel off-road maverick (black)
Options for hubs
SSD RC Wheel Hub with Brake Rotor x2
Vp .225 slw hubs
Vp .325 slw hubs
Options for tires
Rc4wd 1.9 Michelin X[emoji2400] Force XZL+ 14.00 R20 4.23" tall
Rc4wd 1.9 Atturo Trail Blade X/T* 3.95" tall
Rc4wd 1.9 Fuel Offroad Mud Gripper 4.33" tall
Rc4wd 1.9 Atturo Trail Blade M/T 4.25" tall
Rc4wd 1.9 Goodyear Wrangler MT/R 4.19" tall
Options for foams
Crawler innovations Deuce's wild 1.9 4.0-4.4
Crawler innovations Deuce's wild 1.9 3.85-4.19
Obviously foams depend on what tire I get
Sent from my Moto Z (2) using Tapatalk
Picked up 2 pairs of 100mm king coilovers.,. Not sure what springs are on them. Cleaned and changed oil from 50 to 20wt...the other pair I kinda ruined the collar/lower spring cup and sleeve by trying to clean them in purple power. Wasn't thinking.lol.
Sent from my Moto Z (2) using Tapatalk
Sent from my Moto Z (2) using Tapatalk
Finally got my wheel tire setup I think that will stay. They are SSD champion 1.9 wheels on rc4wd 4.33 fuel mud grippers. With the stock foams they seem decent. Might change later.. love the look
Sent from my Moto Z (2) using Tapatalk
Sent from my Moto Z (2) using Tapatalk
Ya. Once I saw these wheels, I knew they would be perfect for this rig. Almost bout a set with the black ring. Glad I didn't. These look so much better in person then in a picture.. it was about $180 for the wheels and tires. So I thought about it for a while before I bout them.. thanks. I have really high standards for this rig. Seeing as how it's my first time doing this.. really want to start another build. Lol
Sent from my Moto Z (2) using Tapatalk
I have the same problem lol, its hard to let got of that much money at one time. I just paid $140 for wheels n tires for my monster truck build.
Buildin a truck is so addicting. Ive got 2 im tryin to work on but not sure which way i wanna go with them. Got a 4 link n a leaf sprung.
Sent from my SM-J327VPP using Tapatalk
Ya.im working on this rig, I have a scx10ii honcho for my 7 year old and moding that and I want to build a lc70 or another hardbody
Sent from my Moto Z (2) using Tapatalk
Got the outside of the bed painted. The tailights glued in and tailgate painted. I'm looking for hinges for the tailgate. I was gonna add lights. But I'm gonna wait to build another cab/bed.not sure what I'm gonna do with the inside of the bed yet. Still got to cut of the rear bed tubs. Not sure how to do that yet.
Sent from my Moto Z (2) using Tapatalk
Sent from my Moto Z (2) using Tapatalk
