Dual Esc Adapter-Dig, mixing, biasing, for MOST 3CH RADIOS

[losikid]

Anything ever come of the code revision?

No not yet, i've been busy here lately, filling pre-orders, building custom led light bars, custom radios, working on this gt3b kit, fixing my losi, trying to write/modify code for my website...I'm hoping to have it finished and tested mid next week...hopefully. I've been bored out of my mind the last few weeks, but this week i've been packed, i hope it stays this way:mrgreen: more money means more new stuff for you guys 8)

 

[losikid]

Ok so i have the firmware modded and tested, it works but i'm unsure if it solves the neutral point moving slightly. As of now till its proven i'll reflash anyones for free you just have to pay ship, or if you'd like to buy a new one with this new revison on it i can do that as well, just pm me.

 

[losikid]

I have two proto's going out for some more testing than i can do any time soon. Option 1 is turn the sensitivity on the pots way down, so now it only gives +/-10% adjustment, before it was 50%. Option 2 is eliminate the pots completely. For now they have to stay on the board, but they'll have no use. So if its the pots causing the slight variation of neutral points, there is a fix.

Also i'm working on a low profile header option, which the esc's will plug directly into it, and there will be short extensions include to connect it to the rx. They'll be size tested to see if they'll fit in the xr elec box.

 

[PANIC]

Just placed an order .tnx

 

[eedew]

On the ordering pg., it says that there are 3 available, but it also says that the status is pre-order only. Are there 3 available, or are there 3 available for pre-order?

 

[losikid]

On the ordering pg., it says that there are 3 available, but it also says that the status is pre-order only. Are there 3 available, or are there 3 available for pre-order?

I have 3 that will ship in within a week...i just changed the site.

 

[durrty]

I am looking to buy one, do you know when more are going to be out for sale?
Thanks

 

[losikid]

I am looking to buy one, do you know when more are going to be out for sale?
Thanks

just added some more stock, for some reason i didn't get noptifed they went out of stock, sorry.

I'm abit behind on wantamix orders, it'll probably ship early next week.

 

[durrty]

Nice, thanks for the quick reply.
order placed.

 

[sackamous]

I'm looking to put together a fairly cheap xr10, would this work with a 3pmx and a Novak m2 dual brushed esc? Or is there better or cheaper options for a full function rig? I'm new to dual motors any my only crawler experience is my ax10 artr scorpion with a brushed novack crawler esc and a tactic 2ch radio.

 

[losikid]

I'm looking to put together a fairly cheap xr10, would this work with a 3pmx and a Novak m2 dual brushed esc? Or is there better or cheaper options for a full function rig? I'm new to dual motors any my only crawler experience is my ax10 artr scorpion with a brushed novack crawler esc and a tactic 2ch radio.

the m2 won't work with the wantamix...you need two esc's like two mamba micro pro's, or two tekin fxr's...the wantamix does work with the 3pm-x though.

 

[sackamous]

So like 2 of these to stay low budget? http://www.ckrccrawlers.com/integy-rock-crawler-complete-esc-50t-drive-motor-sys-p-3281.html

 

[eedew]

It said mine shipped like 5 days ago and I still haven't gotten it.:shock: Damn postal service!:evil:

 

[losikid]

So like 2 of these to stay low budget? http://www.ckrccrawlers.com/integy-rock-crawler-complete-esc-50t-drive-motor-sys-p-3281.html

No, those look like horrible esc's. I'd suggest, with a low budget, to do two of these for your esc's

http://holmeshobbies.com/product.php?productid=252&cat=2&page=1

and two of these for your motors

http://holmeshobbies.com/product.php?productid=217&cat=17&page=1

and to help compensate the cost you could get one of these instead of the 3pm-x and wantamix

http://www.overkillrc.com/products.htm#ecwid:category=1230201&mode=product&product=5583397

The above is a flysky GT3B that i upgraded the firmware on to support all this

http://www.rccrawler.com/forum/showpost.php?p=3143630&postcount=1

 

[losikid]

It said mine shipped like 5 days ago and I still haven't gotten it.:shock: Damn postal service!:evil:

Thomas, according to the tracking number you should be getting it today.

You should be able to find your tracking number if you login in on my site.

Edit: I sent out two orders to WA...sorry if i got you mixed up. But one of the orders are out for delivery, they other is arrived at a po

 

[sackamous]

So with the gt3b would I have full dig and proportional controle, would I still need the $40 box you build?

Are those 45t motors?

 

[losikid]

So with the gt3b would I have full dig and proportional controle, would I still need the $40 box you build?

Are those 45t motors?

Yes it'll give you dig and proportional for dual esc's

No the wantamix is not needed

As for the motors, he offers different winds.

 

[sackamous]

Well that remote and electronics I could have a completed full function kit under 500! Wait got to buy tires huh well for around 540 lol. I need to line that all up threw the wife though. I am currentely working on her for a bow fishing rig and she is after a cruise so might be a few weeks I'll deff be comming back to you for a radio. What's the turn around time might have to order it before I'm ready, oh how many recievers it comes with, and how much are they?

 

[losikid]

Well that remote and electronics I could have a completed full function kit under 500! Wait got to buy tires huh well for around 540 lol. I need to line that all up threw the wife though. I am currentely working on her for a bow fishing rig and she is after a cruise so might be a few weeks I'll deff be comming back to you for a radio. What's the turn around time might have to order it before I'm ready, oh how many recievers it comes with, and how much are they?

About two weeks before the radio will ship...comes with 1 rx additional ones cost $10

 

[scorpion_ax]

Well i just got mine in the mail the other day after what felt like three months.....and that is from the postal strike in Canada screwing things up for a lot of people.

I just got this thing all hooked up and setup and it works great i think.

the only issue i have is that one of my fxrs is either lazy or there is a fine tune thing that needs to happen.
i get the red led in nuetral
the yellow in 4x4
and the green in iether dig function

when I plug my battery in only one of the fxr's goes through its initial programing beep cycle and fires up for ready. The other fxr sits there and the lights on it do a run through from one end to the other until I switch the adapter through its features a few times then its like magic ((glitch??)) the second fxr fires up through it programing beeps and then we are good to go......

Anyone else ever have that issue. I am almost sure its not due to the wantamix cause all works well with it.

over all real happy with this and should be cool to run it for our season last comp coming up this weekend.
I will be the only one in our club that has anything like this so I can't wait to see the look on there faces when i dial out the clod and climb those lips and ledges.

Thanks Losikid "thumbsup"