Bully2 brushless with dig.

[QLDBully2]

Hi all,
I've converted my Bully2 into brushless, SE fusion. All went very smooth and easy. Recommend for sure, sadly no front or rear dig. I've soldered and ran multiple connectors etc.
I'm not new to crawlers but am a bit stumped to why the rocker dig won't activate with the FSGT5 channel 4 toggle. It turns on, I've gone through the settings but no avail. Considering a different transmitter.
Is it due to it being a brushless component?
Can someone please share advice.
Have a good day.

 

[HumboldtEF]

What you've done is made a dual ESC setup (which is the best for MOA), that means all you need to do is program the dig mixing on your radio. You shouldn't need the RC4WD dig switch, it was made for a dual motor but single ESC.

 

[QLDBully2]

Hi
I'll give it another look.
I tried, but maybe I missed something.
Thanks for your reply

 

[HumboldtEF]

I'd remove the rocker dig switch from the system and try reprogramming the mixing for dig.

 

[QLDBully2]

I don't have the mixing option, it's not a spectrum.
Still no luck.
Thanks