-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Bay City or Tri Citys MI
- Thread starter clayton78
- Start date
arcticjeff
Quarry Creeper
Today
Thanks for all of the help and set up advice today. Another good day, even if I spent most of the day tweekin. Mike could you post some pics of your set up. I'm interested in swithin my arm and shock placement around. Well guys it will probably be awhile until I'm back, see ya when I see ya."thumbsup"
Thanks for all of the help and set up advice today. Another good day, even if I spent most of the day tweekin. Mike could you post some pics of your set up. I'm interested in swithin my arm and shock placement around. Well guys it will probably be awhile until I'm back, see ya when I see ya."thumbsup"
Damn, sorry I missed it guys. Was in Sand Creek from Wed to Sat, then Grand Rapids from Sat afternoon to This evening. just got back in at 11 30. I wanted to leave early this am to get out, but it just wasnt going to happen that way.
Looks like i may be absent for a few more weeks now. looks like im going to Californ I A for 2 weeks. Leaveing this Tuesday.
Jeff (hooker) Give me a call Monday when you can. want to find out whenth LTMCC is haveing their meeting. Looks like I ll be getting back around the 14 to 16ths of April.
Looks like i may be absent for a few more weeks now. looks like im going to Californ I A for 2 weeks. Leaveing this Tuesday.
Jeff (hooker) Give me a call Monday when you can. want to find out whenth LTMCC is haveing their meeting. Looks like I ll be getting back around the 14 to 16ths of April.
chris4207
Quarry Creeper
Had a blast nick, I really enjoyed abusing your rocks (and everything else in the garage) with the WK.
Parts are on the way.
Parts are on the way.
arcticjeff
Quarry Creeper
droopin it baby
I did some searchin today. I found some springs at menards that fit perfectly in the stock shocks. I got it set with that spring on top and the pen spring from mike on the bottom. Lot smoother than the stock set up. My ride height is at about 2 1/4. Going to play with this for a little while.
Question?? I was moving that battery I just bought from Doug and found a problem. The red small wire is broke off just inside of the case, the one with that little white plug on it. Is this going to be a big deal. Its not the main wire that I plug into the crawler. Not sure? I'll try to get a picture up later."thumbsup"
I did some searchin today. I found some springs at menards that fit perfectly in the stock shocks. I got it set with that spring on top and the pen spring from mike on the bottom. Lot smoother than the stock set up. My ride height is at about 2 1/4. Going to play with this for a little while.
Question?? I was moving that battery I just bought from Doug and found a problem. The red small wire is broke off just inside of the case, the one with that little white plug on it. Is this going to be a big deal. Its not the main wire that I plug into the crawler. Not sure? I'll try to get a picture up later."thumbsup"
setup info for jeff
Hey Jeff - I got some pics for you - look here
http://s104.photobucket.com/albums/m183/harleymon/rock crawl/
notice which chassis holes i used on side plates.
70 weight all the way around - clip one hole in each piston. 6.5 oz front tires plus 7 cell 2/3A size over front axles. 3 oz rear tires. panther cougars with 2 mem foams in each one.
have fun !!
Hey Jeff - I got some pics for you - look here
http://s104.photobucket.com/albums/m183/harleymon/rock crawl/
notice which chassis holes i used on side plates.
70 weight all the way around - clip one hole in each piston. 6.5 oz front tires plus 7 cell 2/3A size over front axles. 3 oz rear tires. panther cougars with 2 mem foams in each one.
have fun !!
Hard to say exactly what potential impact may be unless I see your battery Jeff. What I can say though is this - we all have to be careful with these li-po batteries - they can be very dangerous. I have been using them since they came on the market and I am always extra conservative when something is not right. My advice - place it aside and get hold of Doug.
Mike
Mike
Right on bro Clayton. This RC stuff is all fun and games until someone gets their eye poked out. Be careful around those li-pos !!
As brother Timahhh would say - lets keep it real. In other words:
"All the chills, all the thrills, all the spills - none of the hospital bills"
;-)
As brother Timahhh would say - lets keep it real. In other words:
"All the chills, all the thrills, all the spills - none of the hospital bills"
;-)
arcticjeff
Quarry Creeper
pics
thanks for the pics mike I think they will help. As for the battery. I plan on getting hold of Doug either tonight or wednesday. Hopefully the wire can be fixed and I'll be good to go. I'll keep ya updated."thumbsup"
thanks for the pics mike I think they will help. As for the battery. I plan on getting hold of Doug either tonight or wednesday. Hopefully the wire can be fixed and I'll be good to go. I'll keep ya updated."thumbsup"
Well from much help form Mike and Chris today the slash track is taking shape. we got the whole layout painted out and some tube layed. and man its big. Its a 1/10 of a mile 1 lap. so guys get ready for some carnage."thumbsup"
Similar threads
