battery options

[geotracker7000]

ok so whats a good battry? i wants something smaller so it will fit on rear axel or next to full size servo siting on driver side. im runing a hitec 625mg a traxxes xl 2.5 and futaba r152je. motor is a losi crawler motor using a losi 7.2 1100ma mini pack now. its large and not alot of places to get it low. dont like putting batterys on links.

 

[TedBull]

Next to the servo is the better spot. Not the best IMO, but better than the rear. I see alot of guys running these up front.
Losi: 7.4V 300mAh 2S 15C LiPo Micro-DT: Losi (LOSB0871)

Have you considered mounting the battery on your front upper links using lexan? If so the Gens Ace 350mah 2S are a good battery and a sweet deal.
Gens Ace 30C 350mAh 2s 7.4v Li-Po Battery

Another option is a aluminum battery mount from Infectous RC. It is a direct bolt up to the mrc pro and keeps the stock links. It mounts the servo in the center and has a battery tray that fits between the links. Very sweet design and is easy to mount up. That setup will work with up to a 860mah maxamps like I use.

Here is a link to them, they dont have a page up for their servo mounts but send them a PM and they can get you setup. http://www.rccrawler.com/forum/chas...-titanium-mrc-chassis-plates-**updated**.html