Any suggestions for a heavy TF2 setup?

[Hypergarage]

I got my TF2 packed with a lot of heavy stuff. Inside and out. I'm running a tekin RX4 ESC and 45t motor, 2 servos (one for steering, one for shifting), and a 5000mah lipo on the inside. On the outside both front and rear bumpers are aluminum (the front has an RC4WD warn winch), Mojave body with a shell and an aluminum rack on the top loaded with scale accessories and a full interior... so yeah this weighs about a thousand tons... and yes I've ran into the expected issues. Saggy tires and fully compressed suspension. Any recommendations for tires? and what should I do about the suspension? Keep in mind I'm trying to look scale so I don't want any 130mm green boom racing shocks on this truck. Let me know your suggestions! Thanks!

 

[WesleyRoy]

You are looking to the same problems i have with my TF2 altough i use my TF2 just for slight Trail running. To acommedate the heavy load on top (topper, roofrack, lightbar) i used some Weights and sticked then to the chassis. That helped a bit. Tried to weighten my 1.55 wheels however the Weights didnt fit the small wheels.
I did used stiffer springs especcially ij the rear. In stock shocks.


Verstuurd vanaf mijn GEM-702L met Tapatalk

 

[Ty1330]

I run 4 leaf springs on each corner, top to bottom goes medium, full leaf, medium, short. Works really well

 

[MAGNUMB]

For tires you can try Crawler Innovations Deuce's Wild Foams. About the stiffest foams out there and won't absorb water.