Ae-2 set up ,castlelink for AE-2

[WMDRCCRAWLER]

I need to know what caslelink you need for the axial ae-2 esc.Will the castlelink program card work with it?

 

[tgh117]

According to this thread it has worked for others in the past. Don't see why it would still work now.

http://www.rccrawler.com/forum/electronics/324530-castle-field-link-work-ae2.html

Good luck

 

[k7zpj]

According to this thread it has worked for others in the past. Don't see why it would still work now.

http://www.rccrawler.com/forum/electronics/324530-castle-field-link-work-ae2.html

Good luck

The Field link needs to be connected to a Windows computer to be able to program the AE-2. If you carefully read the thread that you attached, fortysixandtwo bought the Field link from the recommendations in the thread and then found out it wouldn't work with his AE-2 using it in stand alone mode.

So I bought the Castle Field Link but can't get it to work. It either flashes all lights or the green light comes on but I can't change anything. Guessing I need newer software... which means I am screwed.... I have a mac. :shock:

 

[k7zpj]

I need to know what caslelink you need for the axial ae-2 esc.Will the castlelink program card work with it?

Get the Castle Link. It is cheaper, easier to use and less to go wrong.

Castle Creations Castle Link Programming Kit

 

[J5races]

Set mine up with castle link USB, works awesome"thumbsup"

 

[WMDRCCRAWLER]

I need to know what caslelink you need for the axial ae-2 esc.Will the castlelink program card work with it?

I figure it out and was able to link to my esc with the castlelink field programer & usb .THANKS for all the support to everyone .