about reciever's

[Brehrocks]

i got my new scx10 kit, i got all my electronics. and on my reciever there is 3 channels: ch1: steering ch2:esc ch3: aux, i have a cc bec but there is another slot called batt, anybody know what it is for???? could i have the cc bec in that slot? thanks

 

[Hirschowl]

The CC bec can go into any slot if running into the rx, execpt the ch 1 or 2(of course). If you put it into aux or battery, the rx will see the voltage through the bec. Just remember to cut the red wire from the esc...

 

[Johnnysplits]

Don't cut the wire from the esc otherwise you won't be able to program it.

 

[allanon1965]

yup, just remove it from the connector and tape it up

 

[Brehrocks]

Yeah I just pulled the red wire out and put liquid electrical tape on it, I also put it on my esc solder posts so dirt wouldn't get stuck in there