Correll
Pebble Pounder
I live in Missoula Montana so my title is a joke. HaHa. My wraith started out as a used AX10 from the LHS. Then I mobbed it around with my coworker, known as "Maslin" on here. So, my addiction to R/C again in life is his fault so blame him.
Drove AX10 around 2 years, broke parts, and wanted a different truck, having spent a pile on my AX10 and not wanting to fund too many R/C's, I ordered a used chassis off RC recycler and swapped all my stuff over.
I ran the wraith as low as I could get it and used MIP's "Exclusive" length rear shaft and did not need to run a wraith transmission or grind the center skid plate at all. I also have MIP extended 12mm length outputs at all ends.
I will update with pics and tech as I can. It is not scale, and I am mean to it similar to Maslin. With my breakage percentage lower than his tho...
Parts list:
HH PP 540 2700KV
MMP
Castle BEC
1230SG savox
HR spools F/R
Axial uni's
43/13 axial Gears F/R
VP Truss's
VP scale knuckles
STRC steering
Axial servo horn
RR trans gears
steel 32p pinion and spur
Flysky el cheapo remote/receiver
Gmade shocks
CI DD soft foams
Axial plastic wheels
RC4WD wanna-be boggers
MIP Driveshafts
Aluminum trans housing from HR or somebody Chinese.
All stuff You have heard about Before
As Old AX10
Driveshaft clearance with AX10 trans
Bright ass yellow for the Jeep body
I originally wanted a bomber chassis, then I realized Im not cool enough to own a bomber. But, I did qualify for an "amazon warehouse" deal used JEEP JK body. So thats good enough I suppose.
Yellow looks ok. Probably wont use many of the stickers.
Drove AX10 around 2 years, broke parts, and wanted a different truck, having spent a pile on my AX10 and not wanting to fund too many R/C's, I ordered a used chassis off RC recycler and swapped all my stuff over.
I ran the wraith as low as I could get it and used MIP's "Exclusive" length rear shaft and did not need to run a wraith transmission or grind the center skid plate at all. I also have MIP extended 12mm length outputs at all ends.
I will update with pics and tech as I can. It is not scale, and I am mean to it similar to Maslin. With my breakage percentage lower than his tho...
Parts list:
HH PP 540 2700KV
MMP
Castle BEC
1230SG savox
HR spools F/R
Axial uni's
43/13 axial Gears F/R
VP Truss's
VP scale knuckles
STRC steering
Axial servo horn
RR trans gears
steel 32p pinion and spur
Flysky el cheapo remote/receiver
Gmade shocks
CI DD soft foams
Axial plastic wheels
RC4WD wanna-be boggers
MIP Driveshafts
Aluminum trans housing from HR or somebody Chinese.
All stuff You have heard about Before
As Old AX10
Driveshaft clearance with AX10 trans
Bright ass yellow for the Jeep body
I originally wanted a bomber chassis, then I realized Im not cool enough to own a bomber. But, I did qualify for an "amazon warehouse" deal used JEEP JK body. So thats good enough I suppose.
Yellow looks ok. Probably wont use many of the stickers.
Last edited: