3D Printed Accessories and Light Bars for Twin Hammers

[Grimlok]

So i wasn't really happy with the selection of lighting for the twin hammers, so i made my own and i wanted to share mine and get input.

So please tell me what you think so far all the files can be found here:
https://www.thingiverse.com/thing:2397853

 

[smog]

I like the old school look. The fronts remind my of the OG Tamiya buggies . Couldn't comment on the quality, how have they held up to the durability test? The ones up top seem exposed to roll-overs.

 

[Grimlok]

so the top lights are exposed but because they are mounted to the flexible roof panel, the mount can flex enough that all that happens is the lens get scuffed.

i took the car through a job construction site and it held up great even after flipping at 45+ MPH and getting launched out of a concrete storm pipe.

im working on some running light mounts now that will attach to the frame instead of the roll cage.

the lens in the front buckets weren't seated all the way so they have been replaced, and i thinking about remaking the front bracket out of TPU or some other flex filament.

let me know if there are parts you want to see posted to thingiverse im not sure how many 3d printed parts i want to make for it just yet and im open to ideas