• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

esc

  1. Chodey24

    SCX-10 Dingo Motor/esc Q

    I have a axial dingo and i need a new motor and esc... and i want to be able to crawl really good and have alot of torque not as much speed just torque to crawl up stuff and over stuff so if you have any ideas of good stuff let me no thanks Cody!!.....
  2. M

    Eiger Terra Claw 55T ESC Combo WONT WORK! SOLVED

    Hello Today i got a problem with the Eiger ESC, when i try to go forward it only "beeps" very silent but i can drive backwards. When i drive backwards for a while i can out of nowhere go forward for about 2 sec and it slowly slows down to stop. But i can go backwards again and do this all i...
    • Maglizard
    • Thread
    • crawling eiger esc rock terra claw 55t
    • Replies: 1
    • Forum: Electronics
  3. L

    esc and motor

    Ok just curious in every1 opuion. Wat is the best hands down dont care how much it costs, esc and motor combo and wat battery to run with it. Goin to install in a ridgecrest have basic up grade all axial parts now time for electronics jc curious wat to get
  4. R

    Esc not connecting to controller

    My axial AE-2 esc isn't connecting to my AX-3 I'm guessing I need to rebind it?
  5. T

    motor esc compatability

    I want to make my honcho a bit faster for flat land stuff can I swap over a 20T motor without changing anything else out electronics wise. Everything is currently stock. Also is the axial 20T a decent motor or should I go with something more along the lines of a traxxas 20T stinger. Any help...
  6. laxjj14

    Og cc mamba max

    Has anyone tried taking the bottom case of these and shrink wrapping them to save space I took it off today and noticed it makes them a bit smaller and was thinking about trying it until I can get something smaller.
    • laxjj14
    • Thread
    • castle creations esc mamba max shrink
    • Replies: 0
    • Forum: Electronics
  7. laxjj14

    What's the best esc or esc's for moa's?

    Not sure if I should try the m2 dig or dual fxr's or side winders? I don't really want to spend a bunch of money but I know good esc's can change a crawler completely.
  8. lordjasper1988

    spektrum dx3c... need help

    hey guys,im going to get a spekrum dx3c tx for when i put my xr10 together, i know with moa rigs dual esc is prefferable but i was wondering if anyone has experience using dual esc with the dx3c? i know alternatively the punk rc dig is needed but if i can id like to use dual esc. any help is...
  9. N

    Need help!!!not sure if esc or motor

    Hello everyone, I am new to the rc crawling world. I just bought a used losi night crawler. When the front tires hit my side walk or front steps of my house, it freezes, does not steer nor tries to go over the step, it's like there is no power or I ran out of power even though I have a full...
  10. N

    Problems with Axial AE-2 esc

    okay so i just turned on my wraith to finish setting up a new motor and when the esc started to beep ( basically saying please turn on the controller) i could barley hear it. i turned it off then back on and it still couldn't hear it. any suggestions why this is happening? it hasnt been water...
  11. R

    "waterproofing"

    I'm new to the rc rock crawling deal here i am a big fan of rc stuff and i own many toy-grade rc cars and i want to jump into something bigger. i have read that you do need plastidip and marine grease for waterproofing or should i say waterproofing as much as you make it. I have seen countless...
  12. T

    Recommendations for my new SCX10 Dingo

    Hello Everyone, I am completely new to the crawler world of RC and it has been over 15 years since I was into RC in general. I just bought a SCX10 Honcho RTR and love it. So after spending a weekend with it I decided to get a Dingo so I can start adding my own electronic. The Honcho purchase...
  13. P

    Crawler King ESC and Servo

    I don't imagine there is going to be an issue with this but I thought I would ask to be safe. Would it be ok to put a Traxxas XL5 ESC and a Traxxas 2075 high torque servo in the Crawler King?
  14. C

    magic smoke?

    Hey guys, I had a quick question for ya'll. I'm a noob so bare with me. I have had my wraith for a little over a week and have had a few problems with it, the latest is smoke. I have only ran about 4 or 5 battery packs threw the wraith. Today I was driving it around in the yard, threw the...
  15. jeepscx10

    Novak ESC Question

    I was wondering if anyone has every used the Novak M2 Dig 3S Dual Brush ESC? If so, is it worth getting or is there a better ESC out there? I plan on running a RC4WD 35T motor in a SCX10. Thanks in advanced, Kenneth
  16. X

    torque brush vs brushless

    i just bought a different esc/motor set up and just trying to figure out somethings mainly the comparison of torque before it arrives so.. Its going in my wreckluse chassis with rockforce axles and losi comp crawler trans. i believe the gear ratio is about 99:1 (axles are 30:1 and i have a 13t...
  17. J

    Losi Mini Crawler Pro Help Please

    Hi guys I'm kinda new to crawling but my first crawler is the losi mini crawler pro and im having a fair bit of battery confusion...i don't realy have money for a new esc so i took the Tamiya TEU101BK esc off my tamiya tt01 for the crawler. Now here is the problem i don't really know if the esc...
  18. J

    Electronics Help Please

    OK so this is my first thread so lets start it this way... Yesterday i was bored and i was browsing around on YouTube and I got to a video showing RC Crawlers...I then got bored and decided to go onto Kijiji.ca a trading site to see if there were any cheap crawlers and sure enough i got a Losi...
  19. D

    Anyone mounted a micro outrunner before??

    Hello all, I am curious, i have seen several threads on here with people talking about how they mounted these 5g hextronik 2000kv outrunners in their rigs, but I have yet to find an actual "How To" or tutorial on how to do it. I understand you have to remove a clip to move the motor shaft...
  20. G

    My Esc problems.. I think

    I have a SCX10 TR all stock with the Ae-2 esc. I thought the motor was going bad because after a normal run it was cutting out like it was freezing up but after playing with the battery wires I noticed that would cause it to turn off then back on (bad ground somewhere I though). I took off my...
    • GnarKill
    • Thread
    • beginner electronics esc help me scx10
    • Replies: 0
    • Forum: Electronics
Back
Top