• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

brushless

  1. ProjectSCX10

    My wife and myself by Lake Lanier

    I'm driving the Honcho, She is driving the pink Dingo. This was her first time out driving anywhere besides the backyard. She did pretty good! You think so? "thumbsup" The ledge we were climbing was concave and about 11 inches high. VIDEO0039.mp4 video by screename9520 - Photobucket
  2. ProjectSCX10

    2.2 SCX10-Pic Heavy-Want Suggestions!

    I posted my build in the SCX10 section but I havent gotten much feedback. So I'm trying here! Go here if you wanna see it from the beginning! My ever-evolving SCX10[/COLOR] Go here to see my WIFE'S (YES MY WIFE!) Dingo, "Pinky!" My Dingo "Pinky"-My Husband is helping me build it :) Here is...
  3. A

    trail trekker brushless??

    iv been thinking about a monster truck and adding alot of speed to this trail trekker i was wondering if anybody has made theirs brushless yet and if so what kind of parts are you breaking if any?
  4. M

    velineon system

    Ok so i am getting a velineon system. I have a tiny 12-13 tooth pinion 48pitch and an 87tooth and a 90 tooth spurs. Will either combo cause it to run hot? And if i get the esc fan will i mess it up if it get in water? Is there any type of aluminum heat sink add on for the motor? I am trying to...
  5. M

    "coutelenc light" the silver bullet

    Here is my scx10 turned ax10. Well i have a novak goat 2s for now, hitec hs7980th servo, sr300 reciever and dx3 remote, cc bec at 6 volts, aluminum knuckles, c-hubs, lockouts. Aluminum wraith bent lower links amd custom delrin uppers in the back, venom creeper lower links in front lower and...
  6. M

    Best ESC Motor combo for wraith

    I have these three esc and motor combos, not sure which one is best, because two are Brushless. I have only dealt with brushed before. And how would you go about waterproofing brushless motor? I have wraith I like to do some rock crawling and trail driving with. Originally Used FXR with 35t and...
  7. J

    Tekin 13.5 no low end power? Help

    Hey fellow crawlateers, I was hoping you could help me with a question. I have a fairly heavy wraith with a mmp and Tekin redline 13.5 brushless. She used to be fairly mean but lately it seems like she had less and less grunt when bound up in the rocks. Now on the last run on flat ground in the...
  8. M

    Driveshaft What To Do

    Ok i have a wraith with a venom 3300 kv brushless motor and esc. I have bin running it on a 2s pack with no problems but i wanted more power so i went to 3s and that is when the problems started.i ran it on the 3s for about 5 min and it ate the idler gear so i went and got new steel gears. the...
    • motoxkfx
    • Thread
    • brushless drive shaft rock crawler wraith
    • Replies: 10
    • Forum: Axial Wraith
  9. ProjectSCX10

    Novak Goat 2s ESC brushless jolts/jerks under minimal throttle

    First electronics post. And I've found nothing on the issue. (Could be my lack of electronics vocabulary, sorry) :cry: I've had a small problem that I havent been able to solve since I got the novak goat 2s ESC and 18.5t brushless. Occasionally when I have the throttle in neutral, and give...
    • ProjectSCX10
    • Thread
    • brushless electronics issue novak goat esc problem
    • Replies: 21
    • Forum: Electronics
  10. ProjectSCX10

    My ever-evolving SCX10

    :mrgreen::mrgreen::mrgreen: Scroll through!! Rate!! Subscribe! I'm updating very frequently! VERY PICTURE HEAVY!! I RESPOND TO ALL QUESTIONS! Suggestions?! :mrgreen::mrgreen::mrgreen: MOST RECENT PICTURE WILL ALWAYS BE POSTED DIRECTLY BELOW! SCROLL THOUGH TO SEE THE BUILD...
  11. S

    Losi Trail Trekker Gravedigger Brushless Video Included

    Here is a video of my latest project form my Losi Micro collection. It's on the trail trekker chassis and has the spin brushless 8800kv brushless motor, Lipo 2X 10A ESC from Black Star Hobbies, and LED lights. The room lighting was a little too bright to show the red flashing eyes but they...
  12. J

    wraith brushless motor/esc help

    heyy guys, i am getting a wraith for christmas and and wondering on what motor to get for it. ill mainly be crawling/bashing offroad etc. Lots of people said to go with the HH BRXL w/ waterproof ESC and the HH crawlmaster 13T motor. ive been looking through this forum have have seen people use...
  13. X

    torque brush vs brushless

    i just bought a different esc/motor set up and just trying to figure out somethings mainly the comparison of torque before it arrives so.. Its going in my wreckluse chassis with rockforce axles and losi comp crawler trans. i believe the gear ratio is about 99:1 (axles are 30:1 and i have a 13t...
  14. D

    Anyone mounted a micro outrunner before??

    Hello all, I am curious, i have seen several threads on here with people talking about how they mounted these 5g hextronik 2000kv outrunners in their rigs, but I have yet to find an actual "How To" or tutorial on how to do it. I understand you have to remove a clip to move the motor shaft...
  15. S

    brushless combo and 3s lipo

    hello, i want to use the robitronic speedster brushless crawler esc with 2s and 3s lipo. i want to do a little bit of everything with the scx10 and need the apropriate brushless motor. i want to choose between the robitronic 17.5T and 21.5T Platinium Brushless Motor. Which one is the better...
  16. F

    Trail truck Esc and Motor combo?

    Ok looking to turn my CK into a great trail truck. I want to do some crawling, mudding, water splashing, and just tearing through the woods. So because of the water thing I am thinking about going with a brushed motor. I am also not wanting a fast truck but one that is at least walking...
    • fatam
    • Thread
    • brushed brushless crawling hpi
    • Replies: 7
    • Forum: Electronics
  17. F

    esc and motor combo

    Ok looking to turn my CK into a great trail truck. I want to do some crawling, mudding, water splashing, and just tearing through the woods. So because of the water thing I am thinking about going with a brushed motor. I am also not wanting a fast truck but one that is at least walking speed...
  18. hobbypartz

    1/8th Scale Exceed RC MaxStone 4WD Rock Crawler

    http://www.youtube.com/watch?v=gSOzMzDt4JI
  19. S

    Scaler newb seeks electronics advice

    Hi folks, I am new to the scene. I'm a 20 year RC vet...past 10 have been nitro 1/8 buggy and truggy. Recently I picked up a brand new RC4WD Subzero for a very low price. I do not intend on doing any major rock crawling, mainly trail riding around/over some obstacles on my property...
Back
Top