• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

Media added by gman350

Navigation

Browse albums

Trending media

1664edit

1664edit

  • Media owner gman350
  • Date added Jan 18, 2016
  • Reaction score 0
  • Comments 0
IMAG2391

IMAG2391

  • Media owner gman350
  • Date added Jan 18, 2016
  • Reaction score 0
  • Comments 0
Innards after running completely submerged. No water/sand/mud got in.

Innards after running completely submerged. No water/sand/mud got in.

  • Media owner gman350
  • Date added Jan 18, 2016
  • Reaction score 0
  • Comments 0
Drive pin plates I made out of aluminum. I threaded the holes all the way thru and put a slot for the pin on both sides. That way if one side gets s

Drive pin plates I made out of aluminum. I threaded the holes all the way thru and put a slot for the pin on both sides. That way if one side gets s

  • Media owner gman350
  • Date added Jan 18, 2016
  • Reaction score 0
  • Comments 0
IMAG2006

IMAG2006

  • Media owner gman350
  • Date added Jan 18, 2016
  • Reaction score 0
  • Comments 0
Creature from the Big Muddy Lagoon.

Creature from the Big Muddy Lagoon.

  • Media owner gman350
  • Date added Jan 18, 2016
  • Reaction score 0
  • Comments 0
IMAG1907

IMAG1907

  • Media owner gman350
  • Date added Jan 18, 2016
  • Reaction score 0
  • Comments 0
IMAG1709

IMAG1709

  • Media owner gman350
  • Date added Jan 18, 2016
  • Reaction score 0
  • Comments 0
I tried to add some screws to help hold the plastic together. Didn't work.

I tried to add some screws to help hold the plastic together. Didn't work.

  • Media owner gman350
  • Date added Jan 18, 2016
  • Reaction score 0
  • Comments 0
The plastic on the pin plate is so soft that it flexes and I have had them warp so bad that they spun on the drive pin.

The plastic on the pin plate is so soft that it flexes and I have had them warp so bad that they spun on the drive pin.

  • Media owner gman350
  • Date added Jan 18, 2016
  • Reaction score 0
  • Comments 0
IMAG1673

IMAG1673

  • Media owner gman350
  • Date added Jan 18, 2016
  • Reaction score 0
  • Comments 0
I have a tendency to run fully submerged since the area I crawl in is along the Mississippi River. To waterproof the axles I found some foam rubber a

I have a tendency to run fully submerged since the area I crawl in is along the Mississippi River. To waterproof the axles I found some foam rubber a

  • Media owner gman350
  • Date added Jan 18, 2016
  • Reaction score 0
  • Comments 0
IMAG1664

IMAG1664

  • Media owner gman350
  • Date added Jan 18, 2016
  • Reaction score 0
  • Comments 0
Broke a couple plastic body posts and then made a set out of some clevis pins. Now instead of breaking body posts I can bend the whole frame, yay :(

Broke a couple plastic body posts and then made a set out of some clevis pins. Now instead of breaking body posts I can bend the whole frame, yay :(

  • Media owner gman350
  • Date added Jan 18, 2016
  • Reaction score 0
  • Comments 0
Then I ground a flat on the shaft of the bolt and threaded a M3 set screw into the boss in the knuckle carrier AX80106.

Then I ground a flat on the shaft of the bolt and threaded a M3 set screw into the boss in the knuckle carrier AX80106.

  • Media owner gman350
  • Date added Jan 18, 2016
  • Reaction score 0
  • Comments 0
I cut the threads and nut off the lower knuckle bolt AX31110.

I cut the threads and nut off the lower knuckle bolt AX31110.

  • Media owner gman350
  • Date added Jan 18, 2016
  • Reaction score 0
  • Comments 0
IMAG1657

IMAG1657

  • Media owner gman350
  • Date added Jan 18, 2016
  • Reaction score 0
  • Comments 0
The knuckle on the right is an aluminum aftermarket knuckle for I think the Axial AX10.

The knuckle on the right is an aluminum aftermarket knuckle for I think the Axial AX10.

  • Media owner gman350
  • Date added Jan 18, 2016
  • Reaction score 0
  • Comments 0
JConcepts G-Locs on ProLine F11 wheels.

JConcepts G-Locs on ProLine F11 wheels.

  • Media owner gman350
  • Date added Jan 18, 2016
  • Reaction score 0
  • Comments 0
2 speed trans was missing shifts. Red arrows show where it was getting worn. Shift servo was set correctly but I wasn't letting off the throttle whe

2 speed trans was missing shifts. Red arrows show where it was getting worn. Shift servo was set correctly but I wasn't letting off the throttle whe

  • Media owner gman350
  • Date added Jan 18, 2016
  • Reaction score 0
  • Comments 0
ProLine Sand Paw 2.2 tires on front on stock RTR rims. ProLine Sand Paw 3.8" on rear on ProLine F11 wheels. Stock RTR tire/wheel in the middle.

ProLine Sand Paw 2.2 tires on front on stock RTR rims. ProLine Sand Paw 3.8" on rear on ProLine F11 wheels. Stock RTR tire/wheel in the middle.

  • Media owner gman350
  • Date added Jan 18, 2016
  • Reaction score 0
  • Comments 0
Castle BEC mounted. Siliconed the ends to water proof, mounted with hot melt glue.

Castle BEC mounted. Siliconed the ends to water proof, mounted with hot melt glue.

  • Media owner gman350
  • Date added Jan 18, 2016
  • Reaction score 0
  • Comments 0
Top view of main circuit board.

Top view of main circuit board.

  • Media owner gman350
  • Date added Jan 18, 2016
  • Reaction score 0
  • Comments 0
Switch that mode wheel rides on, above the rectangular cutout. In the process of this I managed to knock it loose from the circuit board and had to r

Switch that mode wheel rides on, above the rectangular cutout. In the process of this I managed to knock it loose from the circuit board and had to r

  • Media owner gman350
  • Date added Jan 18, 2016
  • Reaction score 0
  • Comments 0
Back
Top