TWH trans in something different

[Exocaged]

I bought a TWH trans from Jami_P in here, began building something a bit different around it. Gmade R1 sides, SCX10 axles, 4WS and brushless lipo power. I started with a 3800KV CC motor but it was too fast for this thing so I put in a Tazer 2800 I was running in a Venom Creeper. This slowed it down to a usable speed. I run a 19 Tooth pinion and I have the losi 3907 32p stuff on order. On 2S with the 2800 it will crawl and do some slow trail ride kind of stuff. The purpose of this rig is to do it all, crawl, bash, foff and rock bounce.

This was the very first run with the 3800, the slipper was a bit too loose. I have gotten better at driving it...
Gmade R1 Bouncer Brushless Lipo - YouTube

On a small hill using 3 different sets of tires with the 2800. The slipper is tight but not locked down. When the angle of the video changes, with the sand paws tires on, thats 2nd gear. Everything else is in 1st.
Gmade Bouncer Hill Climb 3S Lipo Brushless - YouTube

Heres a Cyclone for ya! 3S 2nd gear
Cyclone With An RC Bouncer - YouTube

 

[Mnocton]

Drives like my r1. Have a tekin redline 9.5t and MMP in it, but the benefit of the R1 tranny is that there is not a slipper to mess with.

 

[Exocaged]

Drives like my r1. Have a tekin redline 9.5t and MMP in it, but the benefit of the R1 tranny is that there is not a slipper to mess with.

Or a second gear.