xfactor elec conversion?

[grnlux]

I have searched for any info and can not seem to find any can anybody give me some tips and pics of conversions done
I have been offered a stock xfactor with no motor for cheap want to know if its worth turning into a crawler.
Any help or assistance would be most appreciated.

 

[doubledub]

x-factor conversion

I converted one to electric and the only thing worth keeping is the axles, I used a txt chassis and trans and it works ok. :neutral:

 

[grnlux]

Any body got pics of completed project?

 

[toyofast]

Long time ago, I had a X-Factor that used the stock chassis, side plates and most everythign else.... but I dropped in a Jugg2/TXT tranny w/ a GD-600 into it. Worked fine for the most part. :mrgreen: It was a heavy ass SOB in it's early stages. Pushing a good 17lbs RTR, yet it'd run for about 45-60 minutes :twisted:

Search for Tater Tot or The 'Tot here on RCC and you may find some of the hacked job images that show it's insides :lol:

 

[IBCRUSN]

Here are a few shots of my electrified X. I'm into crawling but living on Long Island doesn't really lend itself very well. I'm also not into tubers, they look cool but just like 1:1 it's overkill for 95% of the people wheeling.

At any rate, it has performed very well. I am planning on extending the wheelbase about another 1" and swapping out the motor for something else (I'm at the point that I will start winding my own armatures).

Cheers,
Kris

 

[4x4transam]

I can help you , have a great X factor crawler

Hello there

I build a great x factor electric conversion if you like i will help you to get all the parts and tell you how to build it.
I also have vids posted on this message board and lots of pictures BEFORE i made the final change overs what made this e factor really good.
i run stock chassis 8 shocks shortened side plates links much longer, stock axles locked, lathe motor, pede transmission, 7 cell 3000 batterie[ truck runs for an hr and 20 min.}, revo driveshats, 1/4 scale servo's.

if you want to know more let me know

 

[nitrorcracer]

Im actually building one as we speak. anybody got any pics of one with a stampede or rustler trans? or info or tips? any info would be greatly appreciated.

 

[nitrorcracer]

Monday ill have the pres trans in and Hopefully have so good luck

 

[Threesheets]

I have an old nitro xtm x-factor that's been on the shelf for 6 yrs and looking to do something with it. What's the typical cost of the conversion?