Wiring with Castle's Quick Connect Duo

[ToCrawl]

What an interesting post this is:
https://r.tapatalk.com/shareLink?ur...share_tid=591746&share_fid=19420&share_type=t
But my question goes a bit deeper, refering to Castle's Quick connect duo.

On my Axial RR10 I'm starting to connect the Mamba X with a castle 1406-2850 KV-Motor with a Tactic's TR325.

To get the connection to a latop nice and convenient, I'll use the Quick connect duo.
Soon I'll change to a receiver with an AUX channel to use castle's great AUX-option.
Could happen that there will be an antenna wire on that receiver, I'm thinking about Graupner's GR-8.

--> As if there wasn't enough wiring with a lack of space in the RR10's ESC-box.

What I'm interested in:

How did you get the wiring with your Castle Quick connect duo sorted. Would be great if you posted some pictures of your wiring.

 

[ToCrawl]

At the end I got it all sorted. What I've got:
CC Mamba X (010-0155-00)
CC Brushless 1406-2850kV (060-0070-00)
CC Telemetry Link for Spektrum X-BUS (010-0148-00)
CC Quick Connect Duo (010-0149-00)
CC Castle Link V3 USB Programming Kit (011-0119-00 )
Spectrum SPMSR4000T receiver

I must admid, that I had to grind the bottom and the lid of the receiver box, to fit it all in.
Until now I have nothing to seal the wire inlet, but got the lid closed.

After enabling the live link and the aux mode in the programming of the Mamba it all runs now. Except sending the Motors temperature neither via the telemetry nor data log.

:mrgreen: