Treal servo saver

[Tucky]

I guess this is the right sub forum for this. I got a Ryft and the stock servo saver is about like tits on a boar hog. I ordered a Treal but it came with no instructions for install and set up. Can someone explain how to set it up correctly?
Thanks

 

[Timmahh]

Basically, it is user preference. The knob in the center can turn clockwise to tighten the spring making the servo saver action harder to make use of. Turning it counterclockwise will loosen the tension on the spring thus allowing the saver to move easier ie, taking less force to activate.

 

[Tucky]

Groovy, thank you. That’s about what I figured but wanted to make sure. It’s feels really tight and I can’t turn the knob by hand but it might be different when I get it on the truck.

 

[Timmahh]

Ya, they seem to use a strong spring, and have it set pretty tight. But you really don't want it just breaking over unless you are hitting the wheel pretty hard, or have it caught in a rut in the case of a crawler.