scx10 front wheel wobble? not like any other

[louis_hay]

hey guys,
i have an axial scx10 g6 with a new bright range rover g4 body and i have had it for nearly a year now and i have always noticed the front wheels wobble so a few months ago i raplaced all the bearings inside the knuckes. The wheels still wobble and as i go round a corner they move and tilt which therefore make the whole front of the car shift to one side.
is this because the front 3 link, the upper Y link comes loose in its hole under the servomount and moves around which then makes the whole axle unstable?, i dont know because i havent seen any links on how to tackle it, or should i just replace the 3 link and get a 4 link on the front to hole the whole thing solid stable 8) or should i upgrade the front c hubs and knuckes to metal?

 

[aztitan]

Sounds like tires, like the foam shifter and is showing the wobble. Pull a wheel of and spin it on a rod and see if its the wheel


Sent from my iPhone using Tapatalk

 

[SurfinStud]

I bought a used rig and had a wobble. It was mostly the knuckle's bushing.
The tiny brass bushing between the C and knuckle.
The opposing side had a wobble too, it was a bearing for me.
Good luck!