*** PunkRC Dig Switch Giveaway *** (Ends 6/28)

[PunkRC]

WWW.PUNKRC.COM​

We are giving away a DIG SWITCH
.....or.....
ANY other product in the store!

plus, EVERYONE can get FREE STICKERS, details on our site.
​

Production Model

NOTE: The Dig Switch model we are giving away
is identical to the production model above,
EXCEPT it has a brown PCB board, not a green one.​

This GIVEAWAY is to announce
the Punk RC Dig Switch for MOA Trucks. ​

We are giving ANY ITEM in the store FOR FREE!!! (listed below)​

Dig Switch,
Dual Steering Computer,
Programmable Computer,
etc....​

Retail Dealers Wanted!
If any hobby shops would like to place a dealer order for in-store sales, feel free to contact me on the webpage.​

HOW TO ENTER THE RC CRAWLER GIVEAWAY....
(1) Be a star holding member. SUPPORT RCCRAWLER!!!!
Then, go to www.punkrc.com for instructions if you want some FREE stickers. All we need is a Self Address Stamped Envelope.

​

THE RC CRAWLER CONTEST ENDS Sunday June 28th at 11:59PM!!!​

http://www.rccrawler.com/forum/showthread.php?t=174568PunkRC Dig Switch Poll
http://www.rccrawler.com/forum/showthread.php?t=180924
PunkRC Dig Switch Announcment
http://www.rccrawler.com/forum/showthread.php?t=174568
Pinchflat's PunkRC Dig Switch Review
http://www.rccrawler.com/forum/showthread.php?t=179891
51504Rock's PunkRC Dig Switch Review
http://www.rccrawler.com/forum/showthread.php?t=177396
Why Other Dig Switches WILL Fail
http://www.rccrawler.com/forum/showthread.php?t=175792

Production Unit Test Drive Video:
http://www.youtube.com/watch?v=0sR6-V1T5ko​

TX Position | LED | Function
Left | Red | Motor #1 Off
Center | Green | Both Motors On
Right | Blue | Motor #2 Off​

Technical Specs:
Size: 1.5"W x 1.8"L x 1.5"H
Power Source: Radio RX
Power Draw: <150mA (similar to standard servo)
RX Voltage: 4.8V - 6.5V Receivers
Motor Capacity: Any
Switch Rating: 12Amps @ 35V (each motor)
Water Resistant Electronics​

Wiring Diagram

​

Hookup:
1 - Plug the Dig Switch Servo Wire into Receiver's Spare Channel (Usually #3)
2 - Wire ESC's Negative Wire to Motors as normal
3 - Solder the Center Dig Switch Contact to the ESC Positive Motor Wire Output
4 - Solder each Outside Contact to the Positive Terminal of each Motor
5 - Trim TX Channel to Center with normal Endpoints​

 

[NU2KRAWLIN]

Thanks for the chance.8)

 

[marlboroman]

Im in Thanks

 

[PEDEcrawlerguy]

Im in thanks for the chance...

 

[Rockcrawler]

I need a spare. "thumbsup"

Thanks for the chance.

 

[Harvo]

Im in ... thanks!!

 

[sddill]

I'm in "thumbsup""thumbsup"

 

[BigB_117]

I'm in. Thanks!

 

[456heinbach]

I'm in thanks"thumbsup"

 

[TomEGunn]

I'll try , thanks
"thumbsup""thumbsup""thumbsup"

 

[gdhknives]

Thanks for the opportunity."thumbsup"

 

[wonder squirrel]

Count me in, thanks. "thumbsup"

 

[jmz6]

Thanks for the chance

 

[clodbuilder99]

pick me! pick me!:mrgreen:

thanks for the chance

 

[Code454]

oh thanks guys im in it to win it

great product

 

[APESHAT]

Sweet! 2nd chance-new giveaway- I'm in, Thanks PunkRC

 

[dirttrackdemon93]

Count me in!!!

 

[jnev]

In! Thanks for the chance!

 

[DARKHORSE]

Im in, THanks for the chance"thumbsup"

 

[joemomma95]

In thanks!!!