We're not an unknown in the crawler world because of our 470oz-in and 630oz-in brushless servos. Now we have something for folks who enjoy micro crawlers! Our new sub-micro servo outputs 105oz-in - complete with steel gears, 13 o-rings, finned center case CNC-machined from a solid billet of 6061-T6 aircraft aluminum, 'and' it meets three MIL-STDS (vibration, shock, water intrusion) just like the rest of our lineup. These have been tested in an SCX24 as well as a Rocksta and have held up very well.
https://www.promodeler.com/DS105CLHV
One last thing. The photos show a label stating 85oz-in. Due to a delay in production our motor supplier finished a motor we had had in mind for this servo all along and after testing it proved as powerful as we'd hoped (and why we'd gone to steel gears in the first place). So the servo in production actually makes 105oz-in instead of 85oz-in, has better gears, and is labeled accordingly, but I just haven't had the time to go back and take more photos so I hope these will do.
https://www.promodeler.com/DS105CLHV
One last thing. The photos show a label stating 85oz-in. Due to a delay in production our motor supplier finished a motor we had had in mind for this servo all along and after testing it proved as powerful as we'd hoped (and why we'd gone to steel gears in the first place). So the servo in production actually makes 105oz-in instead of 85oz-in, has better gears, and is labeled accordingly, but I just haven't had the time to go back and take more photos so I hope these will do.
Attachments
Last edited:
