Mamba max solid red and yellow in nuetral

[tinyT1m7]

I just updated the firmware on my mamba max pro and recalibrated the esc. It calibrates normlly, but after all the leds blink, in goes to a solid red and yellow for nuetral. When throttling forward I have a solid red and blinking green. Then when throttling forward faster, it goes to a normal blinking green only. When reversing, I get a really dim blinking red.

I thought a blinking yellow is normal for nuetral, blinking green for foward, and blinking red for reverse.

Has anyone had this problem before or know a solution?

 

[Capwn]

After updating the firmware, you made sure all the setting stuck?
Brushless, Sensored, All that jazz?

 

[JohnRobHolmes]

If your ESC functions properly, this is not a problem. Good on you for being observant though.

 

[tinyT1m7]

OK cool. Yah it functions normally I just didn't know if it's OK to run it like this.

 

[Olle P]

Do contact Castle about it!
Either the new firmware has a bug in the LED controller or they should update their FAQ regarding LED behaviour.