Krazed Builds Gen2 un-Stuck 2.2S chassis kit

[Robbob]

Here it is our second generation of the popular un-Stuck chassis kit for 2.2S vehicles.
Listening to our Team Drivers and Customers we went back to the drawing board after a year.
We made changes for more tuning options, shock adjustability, optimized geometry and improved weight transfer characteristics.

What did we change?

Lets start with adjustable rear shock arms.
Ability to adjust chassis rake effecting forward weight bias and belly clearance.
Also the tuning ability to try different shock angles.

We moved to the front shocks raising the chassis location higher.
This we found better suited the 3.5'' shocks by allowing them better dampening in the up travel.
It also let the springs flow smoother and effectively.
Less preload on softer springs giving us an improved dampening.

Optimized upper link geometry was our biggest gain.
While there is no exact math to numbers and link locations we ran a bunch through our own math and test trucks and found a happy spot.
Increased front bite with out sacrificing the rear making it too light on decents.
More control in down hill situations.

We also brought 3D printed parts to the rear helping us keep more weight below our center of gravity.
While all kits are printed in black material we also opened up our Shapeways store with the parts so drivers can color customize themselves.
You can find all our Gen2 pieces in our store at https://www.shapeways.com/shops/krazed-builds



Whats included:

Gen2 2mm 3k Carbon Fiber chassis
Carbon Fiber Adjustable Rear shock arms
3D Printed rear brace x2
2 Aluminum front cross braces
CNC Delrin skid for Axial SCX transmission
2mm Carbon Fiber rear axle link mount (for original Axial AX10/SCX10 axles)
3mm Stainless Hardware
What do you need?

Axial SCX/AX10 or AR60 Axles
Axial SCX/AX10 Transmission (slipper unit not reccommended)
Upper and Lower links
Electronics
Tires and Wheels
Lexan body and mounts

And for a limited time we are giving away our rear low roll center axle mount for AX10/SCX axles for FREE!

Price: $79.99 plus s/h -
International is available
(I realize the U.S. has gotten outrageous on our USPS shipping so please feel free to message me about it. I have worked with many drivers on cutting shipping costs)

Available through our webstore:
Gen2 un-Stuck 2.2s Chassis Kit

(Shown for building tips - Colored braces are available through Shapeways)

FREE rear axle low roll center mount:

​

 

[EeePee]

I was expecting the new Axial axles…

 

[Robbob]

I was expecting the new Axial axles…

I was hoping but the parts drought from them is killing me.

 

[EeePee]

Fine, I was expecting the new Traxxas axles… :mrgreen:

 

[Robbob]

Back In Stock and still giving our printed rear AX10 axle mount with them for Free.

Thank you all for the support, the Gen2 is already showing to be as popular as its predecessor!! "thumbsup"

 

[supermoturd]

Love mine! And screw new Axial axles!

 

[bmuzz1]

Just ordered mine and showed it was the last in stock for now. :mrgreen:
Can't wait to build another sporty!

 

[Robbob]

Back In Stock ..... Finally.

Thank you all for the patience on these and All the support. We greatly appreciate it all.

 

[Hal]

Will definately be picking up an un-stuck losi version soon with a rear link mount. Will probably have Chris at RCMadness get in contact with you, don't do paypall. Right now my front axle is stock but am in the process of designing an alum chub replacement that will accept an axial knuckle. Was wondering if anybody else has thought of this? Is the front axle on the Losi where the chub bolts on weak and something I need to be aware of. It could be made longer to make the axles wider and be a simple bolt on. I am liking the worm gear setup but am still learning the week points.

 

[84yoda]

Get in contact with codyboy on here, he sells a kit which includes a brass insert/adapter for axial chubs/knuckles, modified axial uni shafts to fit a losi locker and a modified losi housing. Codyboy has 2 widths to choose from, stock or xr width (xr width is good for 65-70 degree steering). And last pick up a krazed builds front servo/battery plate for the front axle too.

 

[Hal]

Thanks 84yoda. If he will do something with the kit maybe I can get my rig done by xmass. If not, may go my way and try to design and make my own mod. I have machine shop access so mine may still be an option. I like the idea of brass inserts for the added weight. I have an XR10 and 2 complete spare axles and unis.

 

[Robbob]

Plenty in stock and we changed up our ordering for them. Now you pick which skid you want when you order.

We also switched to printed skids w/angled lower link mounts. This was changed to help with the demand for the chassis kits and us keeping two of the same things packaged up but different inventories. Much smoother now.

The lower links were changed to being angled to help with binding on those wider axle combos drivers are using now. If you have the older delrin skid and want to update its easy to get the newer skids through Shapeways. Both the Losi and the Axial skids are on there as well as a blank skid you can drill for any tranny.