How To: Bully 2 w/ HW Fusion Pros and setup on Radiolink RC8X

[jamesbernatchez]

Made a video to help some guys who had questions on how I wired in dual Hobbywing Fusion pros to run off one battery and how I setup the system on the new Radiolink RC8X.



Hoping to give the Bully it's shakedown run this weekend pending a decent 40 degree day "thumbsup"


https://www.youtube.com/watch?v=vXCU9LmXIyQ

 

[Runnin2live]

Between this and another video of how to program the Flysky g7p, I just need to make a decision on which esc’s to go with. Great stuff, thanks for posting

 

[themountain]

Why would anyone do that?? Isn't a Bully to be as light as possible for comps?... and runni2life..the Fusion have usually a ESC included as far as I know

 

[Runnin2live]

Ya the fusions are a complete package from everything I looked at. I’m not really wanting to swap out the motors I already have. As for weight, the smaller ESC’s aren’t much at all.

 

[jamesbernatchez]

Why would anyone do that?? Isn't a Bully to be as light as possible for comps?... and runni2life..the Fusion have usually a ESC included as far as I know

Puts the weight lower than having the esc's on the main chassis. Rig's been working really well for me.

With battery I was at 4lbs and a few ounces ready to go. I actually added more weight on the front axle as it was too light in my experience. now i'm over 5lbs ready to go.

 

[Runnin2live]

Sounds like a good set up to me. Adding the weight near the tires will help them stay planted

 

[Jbrick]

I was wondering about this. Thanks