Got the new build 'Lil Gyshia' finally ready to give a test run, and after Easter Dinner and chit chat, had a chance to giver a test on my one rock pile.
Many have been wondering about how loud the Rhino ESCs are so I decided to record it for a decent example.
At any rate, this got it all pretty much ready last week but weather here in Mid Michigan still sucked until today. lol Literally it was in the 30s and 40s and wet, and the rest of this week will be 60s and 70s and sunny. Spring has arrived and on Easter so double bonus.
But after dinner and chats, everyone took off so I took the opportunity of the remaining daylight and got a short test run out on my 1st rock pile. "
Nice lil vid if it here showing the setup.
One mentionable, Had a brown out as you can see and I note in the vid.
2nd time as I had one inside testing. So the BEC may be claimed to be 10a, but I think thats very hopefull, so i'll be grabbing a CC 10a just for the steering. If I add a winch, i'll run that on the stock BEC as it did seem to have to be pretty pinchy to brown out, but at 45kg the servo is a bit power hungry over burdening the onboard BEC. FYI.
Rhino ESC with a Surpass Hobby 3530 1800kv Drone outrunner I shaved the shaft down to 3.175 to fit a pinion onto.
<iframe width="560" height="315" src="https://www.youtube.com/embed/869s73PmnnE" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>
Many have been wondering about how loud the Rhino ESCs are so I decided to record it for a decent example.
At any rate, this got it all pretty much ready last week but weather here in Mid Michigan still sucked until today. lol Literally it was in the 30s and 40s and wet, and the rest of this week will be 60s and 70s and sunny. Spring has arrived and on Easter so double bonus.
But after dinner and chats, everyone took off so I took the opportunity of the remaining daylight and got a short test run out on my 1st rock pile. "
Nice lil vid if it here showing the setup.
One mentionable, Had a brown out as you can see and I note in the vid.
2nd time as I had one inside testing. So the BEC may be claimed to be 10a, but I think thats very hopefull, so i'll be grabbing a CC 10a just for the steering. If I add a winch, i'll run that on the stock BEC as it did seem to have to be pretty pinchy to brown out, but at 45kg the servo is a bit power hungry over burdening the onboard BEC. FYI.
Rhino ESC with a Surpass Hobby 3530 1800kv Drone outrunner I shaved the shaft down to 3.175 to fit a pinion onto.
<iframe width="560" height="315" src="https://www.youtube.com/embed/869s73PmnnE" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>
Last edited:
