XD60
Newbie
Recently had a different build on a vs410 chassis and really liked how it handled so picked up another vs410 chassis to replace the stock TRX 4 chassis on my trail truck.
I really like the TRX 4 axles for trailing with the selectable diffs and all but the stock chassis was heavy and I don't really find my self using the 2 speed too much.
The final wheelbase is still up in the air since I'm running a cab only so it won't matter as much. Currently it's sitting at 13", it seem to work well so far for the terrain I run in.
The pan hard mount has been spaced further outwards so the steering and pan hard link are closer in length allowing for minimal bump steer
Parts list:
VS410 chassis kit
TRX4 front and rear axles (w/ selectable diffs)
GRC V2 knuckles + portal boxes + brass weights
GRC aluminum diff cover (F & R)
Front lift kit shifter cable (front)
Front Standard shifter cable (rear),
Vanquish 3 geared transmission
Vanquish hurtz dig V2
Mip TRX4 12.3 bronco rear center drive shaft (front)
Mip TRX4 12.8 defender rear center drive shaft (rear)
Gmade RSD shocks 100mm (F & R w/ pen spring mod) w/ MST CMX medium springs.
Homemade stainless links (10 in total with a mixture of 1/4" & 3/16")
Mamba X
Holmes Hobbies Puller Pro V2 Standard 2700kv
DSpower 32kg brushless servo (steering)
2x JX micro TRX 4 shifter servos (F+R diff)
Spt 12kg low profile servo (dig)
Sent from my ONEPLUS A6010 using Tapatalk
I really like the TRX 4 axles for trailing with the selectable diffs and all but the stock chassis was heavy and I don't really find my self using the 2 speed too much.
The final wheelbase is still up in the air since I'm running a cab only so it won't matter as much. Currently it's sitting at 13", it seem to work well so far for the terrain I run in.
The pan hard mount has been spaced further outwards so the steering and pan hard link are closer in length allowing for minimal bump steer
Parts list:
VS410 chassis kit
TRX4 front and rear axles (w/ selectable diffs)
GRC V2 knuckles + portal boxes + brass weights
GRC aluminum diff cover (F & R)
Front lift kit shifter cable (front)
Front Standard shifter cable (rear),
Vanquish 3 geared transmission
Vanquish hurtz dig V2
Mip TRX4 12.3 bronco rear center drive shaft (front)
Mip TRX4 12.8 defender rear center drive shaft (rear)
Gmade RSD shocks 100mm (F & R w/ pen spring mod) w/ MST CMX medium springs.
Homemade stainless links (10 in total with a mixture of 1/4" & 3/16")
Mamba X
Holmes Hobbies Puller Pro V2 Standard 2700kv
DSpower 32kg brushless servo (steering)
2x JX micro TRX 4 shifter servos (F+R diff)
Spt 12kg low profile servo (dig)




Sent from my ONEPLUS A6010 using Tapatalk
Last edited: