Everest 10 wheel fitment

[Fastcassell]

So I am upgrading my E10, and ordered a set of new aluminum 2.2 wheels. I thought all axle bores were the same, but the new wheels size is considerably bigger, almost big enough for the nut to fit through. These have the six bolt hub adapter for the 12mm hex. Are there different adapters or am I just doing something wrong? Thanks for any help/advice.

 

[TheLetterJ]

Most "SLW" (6 lug) style hubs are machined to fit over an Axial style wheel hex. These should solve your problem: https://www.rpphobby.com/product_p/ax30429.htm ... you didn't want to keep the plastic E10 hexes anyway!

 

[Fastcassell]

Awesome, thank you! Guess I don't have an excuse to get those new SSD axle assemblies anymore. ;-)

 

[ferp420]

Awesome, thank you! Guess I don't have an excuse to get those new SSD axle assemblies anymore. ;-)

dont put to much money in that e10 there great for what they are and upgrades only sends you down the rabit hole of broken parts and more upgrades till.theres nothing redcat left on the e10



buy those ssd axles and.build a.new crawler keep the e10 around for a loner rig or a back up you will save money in the end