Dual Esc Adapter-Dig, mixing, biasing, for MOST 3CH RADIOS

[losikid]

I am now building and selling dual esc adapters, also know as wantAmix. Originally designed and built by wantAsummit, however he no longer has the time to continue offer such a great product so i have picked up the product.

Features-

-Front Dig
-Rear Dig
-Proportional Mixing (Biasing)
-Small (less than a square inch in area)
-Simple to use
-Indicator lights

Requirements-

-Two esc's
-Two Channels
....-Main throttle channel (trigger/stick)
....-Aux channel with Linear/proportional control
-Small Phillips or Flat Head screw driver (to adjust neutral points)

For more information use the following links

Tech Thread

Instructions

Original wantAmix product page

Vid testing proportional control thanks to kwkride

Vid on how to setup DX3R Thanks to kwkride

Current pricing is $40 USD + $5 shipping to cont USA

Click Here to Order

 

[losikid]

Compatibly:

Just for dig dual esc dig
-Any radio with 3 pos 3rd channel
--Dx3R
--3pmx
--dx3e
--and more

Dig and proportional control
-Must have a 3 pos 3rd channel, and another switch/knob that has a linear rate/effect.
--Dx3r
--3pm-x
--DX3C

 

[JeremyH]

It is good to see you pick these up! "thumbsup"

 

[losikid]

8 Left, in this batch. Will have more in a few weeks.

 

[crawl rookie]

I want one, useable for the dx3 (the old one) ?

 

[losikid]

I want one, useable for the dx3 (the old one) ?

I have no experience with the dx3. Does it have a 3 pos switch? (if yes then you have f/r dig) Can a step rate or other linear means be assigned to another 3 pos switch, knob, or rotary switch. (if yes then you have proportional as well)

Once i get some time i will sit down and try and figure out which radios are compatible. But right now i am swamped with everyday tasks, custom radios, and now these adapters.

 

[losikid]

7 left

 

[losikid]

5 Left, oh these can be 3tp adapters too, just lmk, if you been wanting those.

I won't have more till servo leads come in from overseas, 2-3 weeks out.

 

[jebster]

i have a wantAsummit tq-true-3-pos adaptor already and love it. i'm using it on my xr10 for the punk dig. i was curious if this module would work with a tq2.4 radio. use the 3-pos adaptor to give me a 3 position switch and use the 2-pos switch for the proportional control.

 

[Stavin Trucks]

Im very interested in one of these.

 

[losikid]

i have a wantAsummit tq-true-3-pos adaptor already and love it. i'm using it on my xr10 for the punk dig. i was curious if this module would work with a tq2.4 radio. use the 3-pos adaptor to give me a 3 position switch and use the 2-pos switch for the proportional control.

No, i don't think that will work.

 

[losikid]

looks like 4 left, it will be a few weeks before i get more

 

[losikid]

Ok i forgot to tell everyone who has ordered, i don't have labels, so all the servo plugs have a marking in them with a engraver tip, a F,3,2,R

F=front esc; 3=ch3; 2=ch2; R=Rear esc.

Sorry if this cause any confusion.

 

[Stavin Trucks]

Money sent for one unit. Thanks

 

[saniel68]

Just ordered mine! "thumbsup" Nice Job!!

 

[losikid]

I'm SOLD OUT, unless something good happens won't have more till two weeks, this Japanese earthquake halted the production of parts i use.

I will except pre-orders though, this will guarantee you a adapter out of this next batch, and will be shipped out 24 hours after i get parts in. Approximately it will take 3 weeks to get to you.

 

[losikid]

All orders from friday till now will ship tomorrow (tuesday) morning,

Thanks for the orders, can't believe how fast these flew by, If you didn't get one out of this batch i will have more in the next two weeks,

However i will discount 5 of them 10% off because they will have two green led's and a red, not a green, yellow, red like normal. This is because i could not order yellow led's, on backorder till late next month, probably japans incident is the cause of slowed production.

Also Check out the new Site, Its still a work in progress, so please notify me of any glitches, or bugs.

OverKillRC.com

 

[Chappy4o]

your vid for setup on the dx3r isnt a working link.

 

[losikid]

I'll fix it here in a second...here it is without the formatting http://www.youtube.com/watch?feature=player_embedded&v=LvU02Bvgr14

 

[losikid]

works now "thumbsup" thanks for letting me know