dspl1236's Raw Comanche

[dspl1236]

Hello World. Been a longtime lurker. Been 20yrs since my last R/C build.

This will be my SCX10 II Raw with a Comanche Hardbody.

Just finished the chassis Saturday and have been living room driving and some backyard snow driving. Kinda surprised to have a few missing hardware bits in the kit, but had alternatives on hand.


-=Parts List=-
-SCX10 II Raw kit
-Lucas Red 'N Tacky grease
-Innovateking 3650 5200KV Sensorless Brushless Motor - 13t pinion
-Hobbywing EZRUN SC8 120amp ESC
-FS-BS6 Receiver
-Zeee 5200 2S 7.4v 50c
-ZOSKAY 35kg High Torque Coreless 180*
-Aluminum pitman arm - needed filed to clear frame and roll bar mount
-Club 5 Jeep Comanche Hardbody
-Club 5 Jeep Cherokee LED kit
-INJORA Front & Rear Mud Flap set.

-+Wheels+-
-Joguly 1.9 Beadlock Wheels Grey
--Hobbypark 120mm Tires with stock foam
--Benedict Harry Wheel Weights
-Joguly 1.9 Beadlock Wheels Gold
--Axial AX31093 1.9 BFGoodrich Krawler T/A with stock foam
--Benedict Harry Wheel Weights

 

[Phildirt]

Which Comanche did you order? I've only seen the hard bodies from Injora and Club 5. Heck they could be the same body. I know there are a few inconsistencies with the Injora version (behind cab area, random vent things, missing fuel door) but it's still a good looking body for a crawler IMO. Seems like most of the people that fuss about them cut them up anyways.

 

[dspl1236]

I got the Club 5 body. Figured it would need modified anyways since its not from an RTR kit. Always wanted a Jeep Comanche.

 

[Phildirt]

I got the Club 5 body. Figured it would need modified anyways since its not from an RTR kit. Always wanted a Jeep Comanche.

That's the best looking one I've seen, and the only hard body I've ever considered if I was going that route. Kind of tired of looking at Toyotas haha. Looking forward to it.

 

[dspl1236]

Soon as I update my photo server....uploader runs on flash :roll: ..... I'll post some photos

Put the body together, very nice kit. Still coming up with a color. Slight body lift clears the 120mm tires fully tucked. No body trimming required. Ill make some fender liners this week. Lighting kit is nice too. Hot glue is such a great tool :mrgreen:

 

[dspl1236]

finally got my image hosting updated "thumbsup". So my hW1060 blewout while doing some motor timing in my B3 Buggy. So the HW1080 and Titain 21t wen into that. I took a chance on a cheap Innovateking 3650 5200KV Sensorless Brushless Motor with 120A ESC. 50k rpm... So far so good. differently rips with the 13t pinion. Will need do some tuning to be more...gracefull. :lmao:

 

[dspl1236]

I have added shims to the front and rear axle output flanges to take up some movement.

I feel my pinions are binding. May need a shim on those too. pinion keeps pulling into the locked diff it seems...

 

[dspl1236]

Still haven't decided on paint. I kinda want an iron basecoat, primer, then paint. this way is rusts over time. Rollovers, dog bites... Loving the brushless. The ESC is Meh.

 

[Phildirt]

If it was mine I would do said bronze/brown undercoat for rust, followed by primer/gray, followed by that mint-ish forestry truck color and maybe even try to hunt down some forestry decals (or if you are really good, not sure what your skill level is with paint) shoot the whole thing in a 1/4 shade darker green, tape off the shape of some door logos/numbers, hit with a lighter shade of the same green, pull the tape...boom! looks like a retired forestry truck turned trail rig with the old markings removed.

You don't have to do all of that, but I am planning on something similar for a future scale build. Just something about those old brush fire trucks that do something for me and a Comanche is the perfect body for it (since nobody makes a nice 12.3 K10 hard body)

 

[JimK]

I have a feeling this is going to be a great looking truck when your done.
Really liking the Comanche body.

 

[Sprocket]

Do you have clearence in the wheelwells/fenders with 120 mm tires on that body?
Or does it need some trimming or mounting the body higher...?
Rig is looking good "thumbsup"

 

[dspl1236]

Sprocket, I have had todo no trimming of the body or Cherokee inner fender liners. the 120mm tires clear no issue.

Swapped in a Hobbywing Brushless SC8. Much much better.
Upgraded from the 20kg to a 35kg servo. Just found a broken front CV join pin....

Got anther set of wheels with the Axial BFG Krawlers. Broke out the oil markers too...

 

[Sprocket]

Ok, thanks"thumbsup" thinking about building a comanche with PL krawlers on my VS4-10 Pro, when my lexan body is used up:mrgreen:
Your rig will surely look nice when finished.."thumbsup"

 

[dspl1236]

waiting on axle parts...still went out to play. One day I will work on the body :lmao:

 

[XJ-Crawler]

Watching this build! I purchased the Injora version of this body and it looks pretty much the same. I have a 3D printer and printed an extension to the cab, which I have to take out of the bed to keep the wheelbase the same.

 

[dspl1236]

Been a long while....

New tires and a paint job over Xmas

Over the last 2 years...
RZXYL Aluminum Front Rear Axles with the OEM Raw SCX axle parts
Tenshock RC906 2400KV
Zeee 5200mAh 50C 11.1V 3S RC Lipo
3ch FPV switch and TS5823 transmitter super glued to an aluminum plate
3x Camera 1000TVL 1/3 CCD 110 Degree 2.8mm
Zeee 7.4V 60C 1500mAh 2S - for FPV
GLOBACT 1.9in Tires 120x48mm

 

[Gula]

Video of that FPV or it didn't happen.

 

[dspl1236]

Here is a quick test upload. Been waiting for a snow day to play 8)

https://youtu.be/2XuTZyOrrVY

 

[JatoTheRipper]

Sprocket, I have had todo no trimming of the body or Cherokee inner fender liners. the 120mm tires clear no issue.

Swapped in a Hobbywing Brushless SC8. Much much better.
Upgraded from the 20kg to a 35kg servo. Just found a broken front CV join pin....

Got anther set of wheels with the Axial BFG Krawlers. Broke out the oil markers too...

Those wheels and tires look hot! "thumbsup"

 

[T I N Y]

What Tires Are These? I Love the flat tread look