Builder's Notes: 1/18th Mercedes Benz G500

[TheBakedBeans]

Hey Everyone! I started this project about 7 years ago. I even had a thread for it (http://www.rccrawler.com/forum/losi-micro-rock-crawler/467359-thebakedbeans-mercedes-benz-230-g.html) but that was so long ago (and I labeled it the wrong G-version). So, I decided to start a new one. Here we go!...

Build Video
https://www.youtube.com/watch?v=qa_SSFImh-Q

Parts List
Body - a toy RC car from AmazonUK store

Frame & Wheels - custom made by Sam Sang

Body Parts - RocHobby LC80 roof rack with lights and ladder
https://www.asiatees.com/model?ROC ...ps&brand=ROC Hobby&model=1/18+Land+Cruiser+80

Tires - Trail Grapplers
https://www.amainhobbies.com/axial-...ppler-m-t-tires-4-axi31567/p-qqzztzeqnczxactz

Scale Hubs - SSD RC
https://www.amainhobbies.com/ssd-rc-1-24-scale-locking-hubs-red-2-ssd00437/p-qqqetskq6cqeqctz

Axles - Axial SCX24
https://www.amainhobbies.com/axial-scx24-front-axle-axi31609/p-qqzztzeqnz2xactz
https://www.amainhobbies.com/axial-scx24-rear-axle-axi31610/p-qqzztzeqnc2xactz

Axle 4mm kit - Hot Racing
https://www.amainhobbies.com/hot-ra...stub-axle-set-hrasxtf39w04/p-qqqeqqeqtzzqqctz

Steel Drive Shafts - Yeah Racing
https://www.amainhobbies.com/yeah-r...t-driveshafts-yea-axsc-043/p-qqqeqsqahz2vqctz

ESC - Furitek Tegu Waterproof with Bluetooth
https://www.asiatees.com/display?Mi...brand=Miscellaneous&model=All&id=188323&pid=1

Motor - Furitek Komodo
https://www.asiatees.com/display?Mi...brand=Miscellaneous&model=All&id=192146&pid=1

Transmission - Axial SCX24
https://www.amainhobbies.com/axial-scx24-transmission-axi31608/p-qqzztzeqnmzxactz

Radio/Receiver - WPL RES V3
https://www.wpl-rc.com/collections/radio-receiver/products/r-e-s-v3

LEDs - eBay special
https://www.ebay.com/itm/1233806366...var=425000885954&_trksid=p2060353.m2749.l2649

 

[TheBakedBeans]

Some photos of the truck when I received it about 7 years ago. This was NOT a normal kit, as I had to figure out all the electronics and body mounting on my own. And obviously there was no aftermarket support for a custom truck like this.

 

[TheBakedBeans]

I broke one of the universal joints back in 2015, so it sat on a shelf for years. I tried to fix the joint in early 2021 and it seemed to be holding. I was also able to redesign the electronics and layout. But, then the UV joint broke again. I almost gave up. Then, I decided to try to fit the Axial SCX24 tranny and axles. They worked!

 

[TheBakedBeans]

After finding new axles, I was able to make some major headway on this project. Be sure to check out the build video for more info... https://www.youtube.com/watch?v=qa_SSFImh-Q

 

[TheBakedBeans]

And here is where it stands today... I'm waiting for the paint to arrive. It will either be Tamiya dull red, maybe a burnt orange, or possibly flat black with some gloss trim.

 

[TheBakedBeans]

Next project on the list... I took an SCX24 and turned it into a rock bouncer as seen here https://www.youtube.com/watch?v=jhT2SSAbx_0

But, since then, I've decided to change it into a MicroShark by Mod19. So, I'll be posting a quick build/video thread for the rock bouncer. Then I'll post the conversion from the rock bouncer into the MicroShark.

 

[TheBakedBeans]

Oh almost forgot. Here is a video showing how the new setup performs...

https://www.youtube.com/watch?v=Wlisp402HyI

It was after this video that I started to break it all down for a final rebuild.

 

[TheBakedBeans]

Another video of this truck from earlier this year, before the rebuild.

https://youtu.be/QQMDWGFC1jw

 

[Slambaam]

Lol those ****ing tires from Sam looked amazing but were awful on the rocks. I’ll never forget them.


Sent from my iPhone using Tapatalk

 

[TheBakedBeans]

Lol those ****ing tires from Sam looked amazing but were awful on the rocks. I’ll never forget them.

Yeah, they were all looks, no performance. I’ve actually been very happy with the Axial trail grappler tires on this truck. I have them sealed air tight with 40 grams of BBs in each tire. They look great on the rocks.

 

[2471:24]

wow, looks like real quality stuff! I’ll definitely be checking those videos when I have more time. Enjoy!

 

[TheBakedBeans]

Finally decided on a paint scheme… what do you guys think?

 

[RødeDK]

Finally decided on a paint scheme… what do you guys think?

Damm so f..... Nice I love the look

 

[TheBakedBeans]

Damm so f..... Nice I love the look

Thank you! I got the idea from IronSide RC on Youtube. I basically stole his design. Props to him and his channel, go check it out.

 

[TheBakedBeans]

It takes two screws on the bottom to remove the body. I wanted to hide a screwdriver somewhere on the truck so I mocked up a awning.

 

[TheBakedBeans]

Messing around on the deck today...

https://www.youtube.com/watch?v=8xQwgZoBQ5g

 

[TheBakedBeans]

One more glamour shot

 

[high plains drifter]

Been following along recently and it really came out nice. I'm not a big graphics guy these days but I love the tan paint and I've enjoyed watching this rig finally come together. It's crazy how frustrating these little rigs can be and so so unforgiving regarding mistakes. But very rewarding when things eventually work out... no matter how much head-scratching is involved lol. I've had to step away from my scx24 project quite a few times just to keep my sanity in tact but overall I sincerely enjoy the challenges... especially when something works lol! Thanks for updating this thread and I look fwd to watching some of the videos you've posted as well.

 

[TheBakedBeans]

Been following along recently and it really came out nice. I'm not a big graphics guy these days but I love the tan paint and I've enjoyed watching this rig finally come together. It's crazy how frustrating these little rigs can be and so so unforgiving regarding mistakes. But very rewarding when things eventually work out... no matter how much head-scratching is involved lol. I've had to step away from my scx24 project quite a few times just to keep my sanity in tact but overall I sincerely enjoy the challenges... especially when something works lol! Thanks for updating this thread and I look fwd to watching some of the videos you've posted as well.

So true... thanks for following the thread. I have many more projects to come!

 

[TheBakedBeans]

a fun video from today at waterfall glen in lemont, IL

https://youtu.be/se7Izpa5GXU