Axial Wraith Tekin Motor noise in sensored mode

[Moabman799]

I have an Axial Wraith that I'm building up with a Tekin 13.5 motor and RS Pro ESC. I would like to run in sensored mode but when I do the motor produces a weird noise and is slow to start up. I take the sensor cable out of the motor and the noise goes away. I recently purchased the Tekin Hotwire cable to see if I could make any changes there to eliminate the problem, but to date all that works is removing the sensor cable connection. Any ideas on what could be causing this? Any help is greatly appreciated.

Thanks!

 

[bbking9]

Sounds like Sensor cable. Buy another - they are cheap.

 

[BELADOG]

Not the cable!

Flip outside two wires.

I also went through this with a 18.5 Novak. Sent it back after Novak told me it was shorting or a bad sensor wire.

If its whining and cogging its the motor wires.
Dont flip "any" two! Only the outside two.

here read this real quick.
http://www.rccrawler.com/forum/axial-wraith/369265-sensored-chattering-help.html