So I am very new to this just got my Wraith went to do the battery forward move. Ran into a snag the leads for both the receiver the esc and the servo are all to short to relocate. I want to relocate them to the back. I want it to be super clean. Can anyone give any advice? Also I would be more interested in getting lead extensions as a kiit rather than butchering together my own splices.
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Axial Wraith Receiver and esc Extensions
- Thread starter Bro
- Start date
-
- Tags
- axial battery forward wraith
WELCOME TO THE FORUMS!!!
Lead extenders sounds like what you are looking for. Below is a link for a set with different lengths. Recommend putting some dielectric grease on the connectors to waterproof them.
https://www.amazon.com/TecUnite-Ext...1547744628&sprefix=servo+lead+,aps,239&sr=8-5
Lead extenders sounds like what you are looking for. Below is a link for a set with different lengths. Recommend putting some dielectric grease on the connectors to waterproof them.
https://www.amazon.com/TecUnite-Ext...1547744628&sprefix=servo+lead+,aps,239&sr=8-5
