Axial SCX24 servo problem

[Take]

Hi guys,

A problem with my SCX24 lead me to this forum, and making my fitst post.
I have a problem with the steering, i was adjusting the servo saver and suddenly the servo started moving real fast left and right without doing anything.

I made a short video of the problem, can you guys tell me if my servo died or i can adjust something in the remote.


https://youtu.be/er6_1D1IffY

 

[spoo76]

Looks like the servo is dead. It's a very common problem with the SCX-24. Especially when adjusting the servo saver. You should be able to easily get a warrantied replacement or you can upgrade to a better servo if youd prefer.

Sent from my Pixel 3 XL using Tapatalk

 

[Take]

thanks, so i most likely killed the sensors when adjusting the servo saver?

I will probably search for an upgrade. Any tips?

 

[Take]

Did some research, looks like the ES08MA-II servo fits right in the excisting servo tray. Ordered one on bangood hope it won't take to long to arrive and i can drive again.

 

[Mr_Wolf_Is_Innocent]

You have to do a slight mod on the es... the lugs need a little trim, and you need longer screws, have a look in the scale forum there is a forum for the scx24, with loads of help and advice, my servo has so far been ok, but I do have some of the es(forgot the rest) to replace it as soon as it fails...


Element Sendero 1/10. Crawler/Trailer.
Scx24 crc. Crawler 1/24.
Wltoys a212. Shortcourse 1/24.
Wltoys k969. Drifty 1/28

 

[Take]

Thanks Wolf.

Yes little trim on the servo and longer screws, but not chopping up the servo tray.