Axial SCX24 Battery Question

[13thwarrior]

Hello all, not sure if this has already been answered, if it has I can't find it.

I picked up an SCX24 for my Dad as a gift and it comes with a 2 hour USB to JST/XH Charger (the charger uses the balance plug to charge the pack). The battery's model number is Dynamite DYNB0012 https://www.horizonhobby.com/74v-350mah-2s-lipo-battery-p-dynb0012

In my large amount of charge leads I have for my chargers I can't find a lead to charge using the connector (not the balance plug). The main connector looks like an E-Flite micro heli connector but is a little bit larger.

If anyone knows I would much appreciate it.

Thanks

 

[spoo76]

It's been discussed randomly in the scale micro crawler sub forum. The battery plug is also the same plug used for the motors on almost every 2-1 electronics combo from micro crawlers since the Trekker. It's a JST PH 2.0

Sent from my LGMP450 using Tapatalk

 

[13thwarrior]

It's been discussed randomly in the scale micro crawler sub forum. The battery plug is also the same plug used for the motors on almost every 2-1 electronics combo from micro crawlers since the Trekker. It's a JST PH 2.0

Sent from my LGMP450 using Tapatalk

Thank you for your quick response. I can't seem to find just a single JST PH 2.0 to 4mm banana plug charge lead. Looks like its primarily a heli / quad battery spec and all the charge leads are geared towards that (6 battery parallel chargers).

 

[spoo76]

Get a pigtail and solder one yourself?

Sent from my LGMP450 using Tapatalk

 

[Voodoobrew]

If you can't solder I'm sure there are twist or crimp banana plugs