Anyone try fitting Aliexpress inner fenders on the Venture

[charlesd]

I found these this kit on Aliexpress.


https://www.aliexpress.com/item/33060074052.html?spm=a2g0o.productlist.0.0.44673f7c1oEDJO&algo_pvid=404d8e16-7d71-4b0b-a8b1-c8fe1ba45179&algo_expid=404d8e16-7d71-4b0b-a8b1-c8fe1ba45179-5&btsid=0ab6d70515926248573337076e2d23&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_



Has anyone tried this as an inner fender on the Venture with the stock body?

 

[soze]

I have these on my SCX10.2 They're by GRC. They're made specifically to fit on a stock SCX10.2 (shock cutouts, screw holes, etc.), so I'm not sure that they'd fit on a HPI Venture.

HPI does have their own lexan inner fender set for the Venture, but they're probably hard to get a hold of right now.

 

[M1tch]

Yeah As Soze says, made for the SCX10. They might fit with some work maybe. I have the HPI inners and they fit well. I'm not sure if any 3D printed ones are available.

 

[charlesd]

I can't seem to find the Hpi inner fenders in North America. They do have them in spain but the shipping cost is insane.:roll:

 

[M1tch]

If the cost of the Aliexpress ones doesn't bother you it could be worth a try if you are prepared to fiddle around with them.

 

[charlesd]

I decided to try and make my own. I ordered some Kydex sheets that are .06 thick. I'll be receiving them next week.

Hopefully this material will be a good choice.

 

[Basicbilly]

If you have a 3d printer I can send you the .stl files to print the ones I'm using.

Sent from my SM-N970U1 using Tapatalk

 

[Basicbilly]

If you have a 3d printer I can send you the .stl files to print the ones I'm using.

Sent from my SM-N970U1 using Tapatalk

Sorry, here is a photo

Sent from my SM-N970U1 using Tapatalk

 

[charlesd]

Nice

 

[crawler2.2]

If you have a 3d printer I can send you the .stl files to print the ones I'm using.

Sent from my SM-N970U1 using Tapatalk

Still have the file for the fenders?

 

[Basicbilly]

Still have the file for the fenders?

I have uploaded them to My Mini Factory for you

https://www.myminifactory.com/object/3d-print-155959

 

[crawler2.2]

I have uploaded them to My Mini Factory for you

https://www.myminifactory.com/object/3d-print-155959

I appreciate that! Nice work for sure. What did you do for the rear?

 

[Basicbilly]

I had a pickup body on it so I made a drop bed that had integrated inner fenders. Unfortunately it is specific to the Axial C10 body and I no longer have a Venture chassis to draw up a set of rear fenders for

Sent from my SM-N986U1 using Tapatalk